jigging is the name of the process of hanging items on a wire prior to suspending into molten zinc to galvanize the steel
In general, galvanized sheet metal is mild (carbon) steel that is used for a ton of different things. This material is tough and strong, and it can be fairly easily worked (bent or formed) in a number of different ways to produce useful products (like HVAC ductwork, to name just one application). It lasts a long time, too, because the zinc coating (the galvanizing) inhibits corrosion quite well.
Spot Welding is a process where two pieces of overlapping metal are welded by applying an electric current through two contact points. The interface of the parts creates current resistance which produces heat. The two metals form a "button" type weld when pressure is applied. The welds will be of the approximate size of the contact points and the filler metal consists of the base materials only (additional material is not generally added). The equipment used for spot welding in smaller operations would consist of a set of "tongs" that apply current and pressure to the parts being welded. This process can be accomplished using a portable unit or an automated process such as with automobile manufacturing.Workpieces are held together under weight applied by anodes. Normally the sheets are in the 0.5 to 3 mm (0.020 to 0.118 in) thickness extend. The procedure utilizes two molded copper combination anodes to gather welding current into a little "spot" and to at the same time cinch the sheets together. Driving a vast current through the spot will dissolve the metal and shape the weld. The appealing element of spot welding is that a considerable measure of vitality can be conveyed to the spot in a brief span (roughly 10-100 milliseconds).[2] That allows the welding to happen without over the top warming of the rest of the sheet.The measure of warmth (vitality) conveyed to the spot is controlled by the resistance between the terminals and the size and length of the current.[3] The measure of vitality is coordinated the sheet's material properties, its thickness, and kind of cathodes. Applying too little vitality won't dissolve the metal or will make a poor weld. Applying a lot of vitality will soften an excessive amount of metal, launch liquid material, and make a gap as opposed to a weld.[4] Another element of spot welding is that the vitality conveyed to the spot can be controlled to deliver solid welds.Projection welding is an alteration of spot welding. In this procedure, the weld is limited by a method for raised segments, or projections, on either of the workpieces to be joined. Warmth is amassed at the projections, which allows the welding of heavier segments or the nearer dividing of welds. The projections can likewise serve as a method for situating the workpieces. Projection welding is regularly used to weld studs, nuts, and other screw machine parts to the metal plate. It is additionally oftentimes used to join crossed wires and bars. This is another high-generation prepare, and numerous projection welds can be masterminded by reasonable outlining and jigging
Galvanizing protects steel from oxidization (rusting).
A galvanizing event is an event that strengthens, that inspires positively, that brings resolve to someone or a group of persons. Both negative events and positive events are capable of galvanizing (that is, producing a galvanizing effect in) those affected by them.
jigging, swaying, choreographing
I personally prefer to use a swivel ring for jigging. However, a solid ring seems to be the most popular method.
Electro galvanizing is the process of applying a protective metallic coating to an underlying piece of metal.
carinosa is the phillipine dance
W. T. Flanders has written: 'Galvanizing and tinning' -- subject(s): Galvanizing, Tinning, Metal spraying
Zinc
Galvanizing
painting and galvanizing
Coatings Cathodic Protection If steel- galvanizing