A linear bus topology is a straight line (linear) topology which wires devices in a straight, sequential fashion (like daisy-chaining). It is characterized by a very simple and easy way to create a LAN but has problems with breaks in any of the cables in the topology.
This linear bus topology does not require a central connectivity device such as a hub, switch, or router.
Linear bus topology is the easiest; there is practically no configuration to worry about except the wiring.
Linear bus topology
Yes, peer to peer can be implemented in linear bus topology.
There are two basic categories of network topologies Physical topologies Logical topologies The shape of the cabling layout used to link devices is called the physical topology of the network. Logical topology is the way the signals act in the network In BUS topology you have "THE LINEAR BUS" and "THE DISTRIBUTED BUS" IN the LINEAR bus all the nodes of the network are connected to a common transmission medium which has 2 end points where as in the DISTRIBUTED, all the nodes are connected to a common transmission medium which has more than 2 end points.
Since momentum equals mass times velocity, if the mass of the truck times its velocity is greater than the mass of the bus times the bus' velocity then the momentum of the truck will be greater than the momentum of the bus.
ATM employs a linear bus or star topology which can work with fiber optics as well as twisted pair cable
Devices on a linear bus network are connected to each other via a wire, usually through a T-connector device. In effect, the devices are "daisy chained" together without any other device connecting them.
In electrical engineering, you may here the term slack bus, swing bus or reference bus. A slack bus is the bus in where the power flow software accumulates the delta between generation and load in the case. this allows for a balanced system and thus a solved power flow analysis. The slack bus is also called the swing bus. In addition, the power flow analysis requires you to know (or assume) the magnitude and phase angle at a specific bus, the angle reference bus. Usually, the swing bus and angle reference bus are in the same location. So, the terms "swing bus" and "reference bus" are often used interchangeably to mean both the swing bus and the angle reference bus. -- This answer assumes that the a Taylor Series is used to create a linear set of equations to solve the power flow. Search Wikipedia for Newton-Raphson method for more information.
non linear
Linear means in order Non-Linear means Organic
linear in active region....
No a linear equation are not the same as a linear function. The linear function is written as Ax+By=C. The linear equation is f{x}=m+b.