Some materials have to be heated before you start to weld on them. They will probably have a maximum interpass temperature, and may also need to be kept heated to a specific temperature for a certain amount of time after you stop welding (called post heat).
The prehaet temperature is taken before welding starts. The interpass temperature is taken between welding passes.
Generally there is no any way to calculate the preheat temperature in welding however, some approaches about it have been developed. Welding method, procedure, thermal conductivity coefficient, workpiece thickness and the carbon equivalent are the substantial factors affecting the preheat temperature. Whether some ideas deny the carbon equivalent term, it is main factor having profound effect on brittle phases in the materials. preheat temperature may be calculated according to formula below: Preheat temperature in Degree celcius = 350 * Square root of (C.E - 0.25 ) Where C.E = CC + CT CT = CC * 0.005 * T T = thickness of plate in mm CC = C + Mn/6 + Ni+Cu/15 + Cr+Mo+V/5 In some operations this formula may give higher results than the needed but that formula may be arranged as; (350*square root of (C.E-0.25))-50 = Actual preheat temperature
4MM..
To preheat means to bring up to the required temperature before using, so for an oven, turn it on and allow time for it to come up to the required temperature before putting in the food. Most ovens have an indicator light on the front panel that will switch off when the oven has reached the set temperature.
Usually the temperature is given on the turkey package. But if not preheat the oven to 325-350 degrees for 15-20 mins
You would preheat the oven for an eggless chocolate cake in the same way you would preheat the oven for any other type of cake: turn the oven on, set the thermostat to the required temperature, then wait for the oven to reach that temperature.
350degree
5000-6000c
5000
It is depend on machine
MTR in welding?
To preheat an oven is to raise the temperature inside to the desired temperature before introducing food. It usually takes about 15 minutes