It is the one which is used to produce flux in transformer and main field flux in motor or generator. Flux is proportional to the current passed through the coil.
Flux is inversely proportional to the reluctance of the medium that the flux passes through. Flux is analogous to current. Reluctance is analogous to resistance. MMF is analogous to voltage.
so if there is a coil carrying 5A current and 10 turns it produces 5*10 = 50 Ampere Turns MMF .
so as the current increases MMF increases. If reluctance of the medium used is high there will be more flux.
Let us take a transformer in that in order to produce EMF in the secondary we have to give flux from the primary for that we need a current in the primary that is called Magnetizing current . Any way if we load the transformer , the transformer primary carries (N2 / N1 ) * I2 current in addition to magnetizing current. Apart from these two currents there will be another current which is responsible for core loss in the transformer. Please note that all these three currents are at different phase angles i.e. they are not in same phase.
Medium for the flux in the transformer is core. If it is a iron core reluctance is more , to produce same EMF it will take more magnetizing current. If we use CRGO steel as core reluctance is less. For less magnetizing current itself we get flux for the required EMF in secondary.
when ever the external voltage is given the movement of charge carriers produce a current i.e drift current
It is the current transformer core meant for metering.
the cosine of the angle between voltage and current of generator is called power factor (pf) of generator.
Alternating current is more efficinent. It is wireless and more efficient than direct current. And it is safer. Plus Tesla is better than Edison
Different devices have saturation currents. For example transformers and transistors. There is not sufficient information in the question to allow a proper answer.
What is meant by the term resistivity?
Fusing current for a wire is the current at which the wire will act like a fuse (melt).
Current flowing through an ac circuit in which power consumed is zero is called wattless current.
Busbar current rating for 1 square inch is 1000a.
Expense payable is a current liability.
it is down
when ever the external voltage is given the movement of charge carriers produce a current i.e drift current
The resistance of a current is a measure of how difficult it is to push the electrons along.AnswerThere is no such thing as the 'resistance of a current'. Resistance is a characteristic of the material through which a current flows, not of the current itself.
it nothing but the flow of electrons to a particular area
"Up-to-date" means "current." It refers to information being accurate as of the current date.
What is meant by the current description of the global economy that "time in distance have been collapsed or compressed
the current disappears!!:))