Vaporizing the refrigerant
Vaporizing the refrigerant
Vaporizing the Refrigerant
The King valve is closed, starving the low pressure side, creating more vacuum while charging with a liquid
Condensor
orifice
When vapor refrigerant is pulled out of a cylinder the vapor is reduced and the liquid boils to replace the vapor that has left the cylinder.
Vaporizing the Refrigerant
Liquid refrigerant charging of a system is normally accomplished in the liquid line. For example, when a system is out of refrigerant, liquid refrigerant can be charged into the king valve on the liquid line or receiver.
The King valve is closed, starving the low pressure side, creating more vacuum while charging with a liquid
To endure that the ONLY gas in the system is refrigerant.
Condensor
orifice
When the refrigerant saturation temperature increases to 36 degrees F.
When vapor refrigerant is pulled out of a cylinder the vapor is reduced and the liquid boils to replace the vapor that has left the cylinder.
FLASH GAS - Instantaneous evaporation of some liquid refrigerant at the metering device due to pressure drop which cools the remaining liquid refrigerant to desired evaporation temperature.This flash gas cannot absorb any heat having a negative effect on the net refrigeration cycle
FLASH GAS - Instantaneous evaporation of some liquid refrigerant at the metering device due to pressure drop which cools the remaining liquid refrigerant to desired evaporation temperature.This flash gas cannot absorb any heat having a negative effect on the net refrigeration cycle
21.1" vacuum
Cryogenic refrigeration is refrigeration which uses freezing mixtures such as dry ice, soilid co2, liquid co2, or liquid nitrogen. In the liquid co2 or liquid nitrogen method, a compartment is fitted with a temperature sensing element that can be preset. This is in turn connected to a control panel which activates liquid co2 or liquid nitrogen cylinder fitted with regulators to release the refrigerant. This is delivered through a spray header into the compartment until the desired temperature is achieved.