answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is minimum width of a space in a parking lot in New Jersey?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Parking space width in inches?

96"


What are the WIDTH of a standard toilet?

the width required for building code space is a minimum of 30 inches.


What is the size of a parallel parking spot on sc dot driving test?

The size of a parallel parking spot on SC Dot Driving Test is 20 feet long. In addition, the width of the parking space is 9.1 feet.


Minimum width and length of penis?

minimum width is like 10 cm and length is like 20 cm


A parking lot is 180 feet wide a crew paints three white lines to divide the lot into equal lanes how wide is each lane?

60 feet wide (180/3)=60 The 60' will actually consist of a two-way traffic lane AND parking perpendicular to the lane on both sides... So the 60' is further divided into an 18' deep parking space, a 24' wide vehicle lane, and another 18' deep parking space. If you have angled parking or one way traffic lanes, you can reduce the 60' width. This is called a double loaded lane (parking on both sides) and is the most efficient use of space for a parking lot and vehicle circulation space.


If a room is 1000 sq ft what are the possible combinations measurements in feet for a rectangular room?

It depends on the definition of a room. What would the minimum width or length measurement be in a space, and still have it considered a room? With a minimum dimension to go off of, must the product of the width and length be exactly 1000 square feet? Must the width and length be in whole numbers?


What is the minimum width of houses?

36"


Minimum width of road in Malaysia?

Malaysia minimum lane width is 2.75 meter according to JKR U2 and this width only applicable for local streets lane they have pavement roads.


What is the size of a standard parking spot?

It depends on the code of each state or municipality. However, here is a reference from a town in MA. # Parking area aisles in a ninety (90) degree layout shall be no less than twenty-four (24) feet wide to provide adequate width for vehicles to enter or leave parking spaces in a single motion. Aisles in a parking area using other than ninety (90) degree angles shall provide adequate width for vehicles to enter or leave the parking spaces in a single motion. # Parking space dimensions # Parking spaces in a layout other than parallel shall not be less than nine (9) feet in width and nineteen (19) feet in length. # Parking spaces in a parallel layout shall not be less than twenty four (24) feet in length, measured parallel to the travel lane, and have a width not less than nine (9) feet, perpendicular to the travel lane. Chapter 185, Section 21 of the Code of the Town of Franklin, Parking, loading and driveway requirements, is hereby amended as follows: Zoning ordinances usually dictate sizes based on vehicle size. They may vary from 8' x 18' to 10' x 20' in general. The MUTCD (Manual on Uniform traffic control devices) which is the national wide standard states the a parking space minimum is 8'x22' and 8'x20' for compact vehicles except on the ends. The end spaces in a line may be as short as 18'.


What is the minimum width of a walk-in closet?

1.2metres


How many sq feet you need to park 20 trucks?

It depends on many factors; the width and length of each truck, how big is the parking space, you need all this information in order to calculate.


What is m s ratio?

Mark of space ratio. M/S=pulse width/space width.