pump eff. = (pump dynamic head x pump flow)/(pump h.p x 3960)flow=gallon per minute
The circ pump is used to circulate the water thru the filter. The booster pump is for running the pool sweeper.
Yes there is an optimum flow rate. Kind of! The heat pump manufacturer will post on the internet or in the users guide what the maximum and mimimum flow rate through his heat pump should be. I take it that the optimum then, is anywhere within that range. My pump manufacturer prescribes 20 GPM to 70 GPM for the heat pump I will be using. Too low a flow causes the heat pump to overheat. Too high a flow is hard on system components. dburr
Both pressure and flow decreases
This is the calculation for how much static pressure shall be created by the pump to flow the water in chiller loop or for the pump to flow the water for cooling tower cycle.
A fan with mixed flows
A fan with mixed flows
pump eff. = (pump dynamic head x pump flow)/(pump h.p x 3960)flow=gallon per minute
what does a circular model of a mixed economy show
The flow of 5 hp motor pump is around 90 GPM.
The circ pump is used to circulate the water thru the filter. The booster pump is for running the pool sweeper.
Government is added into the circular flow model of a mixed economy.
Government is added into the circular flow model of a mixed economy.
Government is added into the circular flow model of a mixed economy.
Axial flow pump has high specific seed. According to US unit Ns >10000 has Axial flow pump.
The axial flow pump with a piston to move in a few.
when actual flow(Qact) in pump is greater than theoretical flow (Qth) then negative slip occurs....