If you have a large power transformer that is leaking oil, do NOT touch it! Older transformer oil contains PCB's which are extremely toxic!! Get a licensed firm to test the oil for PCB's and repair or replace the transformer. Don't fool around with this! PCB's are a serious danger to you and others. Do not let this go. Get it fixed right away!
It's Basic Project Of Transmitter & Receiver circuit <<>> Poly-chlorinated-biphenyls, it is a oil used in transformers to dissipate the heat from the coils of the transformer to the transformer's case. This helps in the transformers cooling. The only problem, it was found out after many years of use that it is toxic to the environment. Zero PCB's is the terminology used for the new transformer oils that are not PCB based.
It depends on the local and national regulations. There is not a single correct answer for this question. In many areas, used transformer oil must be tested for PCB (poly chlorinated biphenyl) compounds before it can be mixed with other oils or burned. Today, advanced recycling and processing facilities can improve the characteristics of used transformer oils to meet the specifications set for new oils.
to cool a winding of transformer and it is a insulating material and transformer oil is a purifing oil
Nytro libra is an uninhibited transformer oil
If you have a large power transformer that is leaking oil, do NOT touch it! Older transformer oil contains PCB's which are extremely toxic!! Get a licensed firm to test the oil for PCB's and repair or replace the transformer. Don't fool around with this! PCB's are a serious danger to you and others. Do not let this go. Get it fixed right away!
An oil transformer is filled with PCB oil to better transfer heat from the windings to the outside case (and into the air).
It's Basic Project Of Transmitter & Receiver circuit <<>> Poly-chlorinated-biphenyls, it is a oil used in transformers to dissipate the heat from the coils of the transformer to the transformer's case. This helps in the transformers cooling. The only problem, it was found out after many years of use that it is toxic to the environment. Zero PCB's is the terminology used for the new transformer oils that are not PCB based.
It depends on the local and national regulations. There is not a single correct answer for this question. In many areas, used transformer oil must be tested for PCB (poly chlorinated biphenyl) compounds before it can be mixed with other oils or burned. Today, advanced recycling and processing facilities can improve the characteristics of used transformer oils to meet the specifications set for new oils.
Transformer oil is pure insulating oil.
to cool a winding of transformer and it is a insulating material and transformer oil is a purifing oil
Nytro libra is an uninhibited transformer oil
transformer consists of polychlorinated biphenyls,...etc
As well as providing a cooling medium, transformer oil is also used to insulate a transformer. As its dielectric strength (how well it insulates) is much higher than air, it means that components within a transformer that are at different potentials can be placed much closer together if they are immersed in oil. So, operating an oil-filled transformer without oil will likely cause insulation breakdown within the transformer.
convection currents
Environmental safety in case of spillage.There has to be a dyke wall for oil containment in case of spillage so that the oil does not get into ground / land.Oil level must be maintained at required level with a suitable breather and Silica gel arrangementBDV of the Oil must be regularly tested and minimum value must be maintained.Oil Cooling arrangement must be maintained.No leakage in radiators.
it is a pit which is used to drain leakage oil of transformers .AnswerIt's a walled area, surrounding a transformer, intended to contain any oil leakage from a transformer.