It depends on what has been added or how dilute it is.
1N sulfuric acid is equivalent to a concentration of 1 mole of sulfuric acid per liter of solution. To determine the percentage purity, you would need to know the exact concentration of sulfuric acid present in the solution compared to the theoretical concentration of 1N. Without this information, it is not possible to calculate the percentage purity.
the purity of the acid is 25%
H2SO4 is sulfuric acid. So the answer is 100%
Non-concentrated sulfuric acid refers to a diluted form of sulfuric acid where the concentration of sulfuric acid is lower than typical concentrated sulfuric acid solutions which are around 95-98% purity. Non-concentrated sulfuric acid is often prepared by mixing a specific amount of concentrated sulfuric acid with water to achieve the desired concentration for a particular application.
The answer depends on the dilution factor and if the sulfuric acid was 100% to start.
Sulfuric acid (H₂SO₄) contains two hydrogen atoms in the molecule. To find the percentage of hydrogen in sulfuric acid, divide the atomic mass of hydrogen by the molar mass of sulfuric acid and multiply by 100. This calculation gives approximately 2.03% hydrogen in sulfuric acid by mass.
sulfuric acid or sulphuric acid
Yes, 50 Normal sulfuric acid is equivalent to 50% sulfuric acid. Normality is a measure of concentration based on the equivalent weights of substances, while percentage concentration is based on weight/volume ratios.
The electrolyte is 65% Distilled water and 35% Sulfuric acid.
To prepare 0.02 N sulfuric acid, dilute concentrated sulfuric acid with water in a specific ratio. For example, to prepare 100 ml of 0.02 N sulfuric acid, you would mix 0.4 ml of concentrated sulfuric acid (98% purity) with 99.6 ml of water. It's crucial to handle concentrated sulfuric acid with caution due to its corrosive nature.
A 40 grams per liter solution of sulfuric acid would be approximately a 4% solution. This is calculated by dividing the mass of sulfuric acid by the total mass of the solution and multiplying by 100.
Around 65% distilled water and 35% sulfuric acid.