0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is difference between axial piston pumps and vane pumps?
An axial piston pump is a positive displacement pump that has a number of pistons in a circular array within a cylinder block. It can be used as a stand-alone pump, a hydraulic motor or an automotive air conditioning compressor.A radial piston pump is a form of hydraulic pump. The working pistons extend in a radial direction symmetrically around the drive shaft, in contrast to the axial piston pump.
What is self priming pump?
In self primming pump, there in no need for removing the air from in the casing. Eg piston pump
What is a pneumatic leverage?
It is a pity you cannot have drawings in the answers.To understand pneumatic leverage, imagine you have two bicycle pumps to pump up the tires of your bicycle. One has a piston with a surface area of 4cm2 (square centimeters) and the other has a piston with a surface area of 8cm2. You connect them together. This means that if you pump one you will see the piston moving of the other.When you push the piston of the small pump with a force of let's say 100 Newton (roughly 22 lbs) and block the piston of the big pump: With what force you have to block the piston of the big pump?You push with a force of 100 Newton (about 22 lbs for the Americans) on the small piston, which will result in a pressure in the system of 100 Newton divided by 4cm2 or 25 Newton per cm2 (pressure). This pressure will be equal under the piston of the connected big pump. So what is the force necessary to block the piston of the big pump? The piston of the big pump has a surface area of 8cm2 this we multiply that with the pressure of 25 Newton/cm2 which results in the force needed to block the big pump of 200 Newton.By applying 100 Newton of force you can, through pneumatic leverage, create a force of 200 Newton.The leverage depends on the differences of surface area of the two pistons.This is the principle of pneumatic leverage. To understand this you have to distinguish between Force and Pressure.Force is expressed in Newtonor Lbs or Kgetc.Pressure is expressed in: Force per surface unit. Like Newton/cm2 or lbs/square inch or Kg per m2.
What type of flowmeter is used on petrol pump?
Positive Displacement meters like piston, gear etc
What is the working principle of a hydraulic crane?
it is due to to the pressure and suction of water
Types of positive displacement pump?
gear pump, crescent gear pump, axial-piston pump, radial-piston pump, linear-piston pump, & vane pump Also, fuel injection pumps such as linear piston pumps and rotary piston pumps.
What is a solenoid pump?
It's a type of piston / plunger pump using the principle of an electrical solenoid to articulate the piston.
What is trochoidal pump?
The axial flow pump with a piston to move in a few.
What is difference between axial piston pumps and vane pumps?
An axial piston pump is a positive displacement pump that has a number of pistons in a circular array within a cylinder block. It can be used as a stand-alone pump, a hydraulic motor or an automotive air conditioning compressor.A radial piston pump is a form of hydraulic pump. The working pistons extend in a radial direction symmetrically around the drive shaft, in contrast to the axial piston pump.
Diagrams show how does a hand operated piston water pump work?
the piston is operated by the crankshaft
What is self priming pump?
In self primming pump, there in no need for removing the air from in the casing. Eg piston pump
What are the dimensions of piston and other parts of a bicycle pump?
There's no set "recipe" for the sizeof the parts of a bicycle pump, other than that they have to fit together. A floor pump might have a 2" piston while a road bicycle hand pump might be 3/4" or smaller.
Where is the piston pump located on a truck?
The hydraulic piston pump is a part, which is common in trucks. It is located below the gearbox, near the chassis of the truck. It is an essential part, therefore if it is broken, the truck will not move.
What happens as the drive shaft rotates on a Stratopower pump?
It is essentially a variable displacement pump. At low pressure, the sleeve, driven by a spider that is attached to the compensator piston seals the relief holes in the piston to provide positive pressure to the discharge port. When the required pressure is reached, the compensator piston moves the spider to uncover the relief holes from the sleeve. Thus not pressure can be built up in the piston. This results in the pump being off-loaded.
Compress the piston on a 1999 deville without a tool?
Brake piston? Front use a "C" clamp to compress Rear - Piston is threaded turn clockwise to compress (water pump pliers?)
What are the main types of hydralic pumps?
Gear pumps. A vane pump. Piston pumps. Radial pump. Centrifugal pumps.
How can you generates mechanical waves?
You can use a hydraulic pump pushing a large piston.
