A power rating is the amount of power a device consumes when operating at full capacity. Typical power ratings of ATX power supplies are 350W, 400W and 500W.
Rated power factor
You cannot 'change' the 'rated power' of a transformer except by changing the transformer for another one. You can, though, operate the transformer below its rated power or, for short periods of time, operate the transformer aboveits rated power.
The ratings state the limits on voltage and current for operating the transformer at full load. The rated voltage times the rated current gives the rated VA of the transformer. Transormers are not usually rated directly for power because this depends on the power factor of the load applied.
The rated voltage of an appliance is no guide to its power rating. To find out the power (watts), you will need to look at your washing machine's nameplate, which will indicate both its rated voltage and its rated power.
Apparent power is the product of voltage and current in an a.c. system, and is expressed in volt amperes. The rated apparent power of a transformer is the product of its rated secondary current and rated secondary voltage.
Power supply units are rated based on their output and efficiency. When more equipment is connected, a higher output power supply is needed.
Engine power is rated in horsepower and in torque. In simple terms torque is the power that gets things moving and horsepower is the force that keeps things moving.
200 MW is the rated power for such a turbine.
No, you need at least a 1.5 amp power pack.
output power/Rated power
Will Power - 1936 is rated/received certificates of: USA:Approved
As of end of August 2013, there are 434 working nuclear power reactors (with total rated power 370.543 Gigawatt plus 69 nuclear power reactors under construction (with total rated power 67.196 Giagawatt).