0
What else can I help you with?
What is proper timing for 69 Chevy pickup truck 350 4bolt min?
4 degrees BTDC.
Is it a 4bolt main?
It could be.
What are the mains torqued at on a 1995 350 5.7l Ive heard 110 is that right?
Research tells me the following: 7/16 Main Caps (2 Bolt): 70ft-lbs 7/16 Inners (4Bolt): 70ft-lbs 7/16 Outers (4Bolt): 65ft-lbs 3/8 Outer Main (4Bolt): 40ft-lbs
Need to know gm engine id number 3970010?
4bolt 350ci
Does a 1976 Chevy G20 have a 2 or 4bolt main?
Probably 4 bolt.
How much hp does a 1970 4bolt main 350 motor have?
if it has the double hump heads..more than likely 350hp. If not 250hp
What is gm block casting number j 1532142 4bolt and what year?
Check out this site, http://www.nastyz28.com/sbchevy/sblock.php
How much does a cast iron 350 block weigh without the crank cam or pistons?
you need a casting number some have thicker walls 2bolt vrs 4bolt mains ect.
What would you estimte the horsepower at with a 350 4bolt main bored 060with a corvette ls8 crank and cam with 1966 327 camelback heads with 64cc chambers edelbrock 600cfm carb?
Around 375
Was there ever a 305 4bolt mains Chevrolet ever put in to production?
All 305 Chevy small blocks made from 1976 to 1996 are 2 bolt main bearing. You will not find a 4 bolt 305 that was made by the factory. One may exist, but it was not made by GM.
Can you tell a 4bolt main by casting numbers on back of block?
no you cant. but i will go a bit deeper. im guessing you have the 350 with code ending in 0010 (its the most common)...i have had three of the 0010 350 blocks.... one was a two bolt and the other two were 4 bolt mains.
Were the 350ci engines in the 1995 k1500 z71 4bolt mains or 2 bolt mains?
I've rebuilt many 1992 through 1995 350 engines in Z71 and siliverados and have yet to see a 4 bolt main. I've only seen them in the 3/4 tons and heaver.
