Dry density (DD) is related to the moisture content (MC) using the following:
DD = DB / (1+MC)
Where DB is the bulk density of the material.
In simple terms, if flux density increases, then field strength increases and vice versa. The flux density is equivalent to field strength times with a variable.
You can figure out the dry density by dividing the wet density by (1+moisture content), with the moisture content in decimal form. So 130 / (1 + 0.19) = 109.24.
With increase in temperature , the density of fluids decreases and their vapour pressure increases. There's no direct relationship for temp-density of HYdrocarbons. But temperature and density are inversely proportional and the constant of proportionality varies from fluid to fluid. For hydrocarbons that constant can be calculated keeping in mind its VP, boiling point at ambient conditions and its constituents.
the natural frequency of a system involves a equation relating mass and stiffness i.e f=1/2pi root of k/m where f : frequency k :stiffness m:mass mass is nothing but density*volume from the relation density = mass/volume another relation may be from the basic force equation f=-k*x we know f=m*a substuting for f we get m*a=-k*x
Bulk density is the dry mass of the solids (M sub t) / total volume (V sub t) Particle density is bulk density (P sub b) / 1 minus total porosity (1-theta).
There is not any simple relationship between density of an alloy and its gold contents. Consequently a measurement af a gold bullion`s density is not used for assaying the gold contents. Pure gold having a density of 18,3 can be alloyed with Platinum(more expensive) to raise density of the ingot above 20. It may also be alloyed with aluminum (God forbid) to bring down the density.
The relationship between density and temperature is linear. In a thermal expansion, density will decrease and temperature increases and vice versa.
they both have density
There is a very great relationship between density and specific gravity. Density contributes to the weight of a substance under specific gravity.
density
yes
No.
density
the relation between relative density and density is that relative density of a substance is its density itself without its unit.
Mass and volume.
The higher the density the lower the buoyancy.
Taken from an extract from a scientific report concerning the thermal properties of Palm Kernels. "The bulk density and particle size analysis were conducted at varying levels of moisture contents. The results showed that the bulk density of palm kernel particles decreased from 420.04 to 330.69 kgm-3, as the moisture content increased from 5.20 to 25.40% (db)."