i think its 96000BPS
The bit rate of any network cable depends on the hardware attached to it. Cat-5e cable on 100bT hardware has a bit rate of 100 megabits per second. Gigabit ethernet equipment will generally only try to send 300 megabits/second through Cat5e cable.
The bit error rate is a standard transmission-error rate of a medium such as copper wire, coaxial cable, or fiber-optic cable. Coaxial cables have a low error rate that is generally 1 in 1 billion bps.
12800 mb\ second
What is the baud rate of a digital signal that employs the differential Manchester scheme and has a data transfer rate of 2000 bps.
After a bit of digging around - the consensus appears that the data rate is 25MB/s
start bit signals receiver end to receive sequence of bits(data bits) and stop bit to signal the end of bit transmission.
12800 MB/second
The calculation is determined by the bit rate of the file movement, and the bit rate can vary throughout which is why the first approximation regularly differs from the calculations made after.
In telecommunications, bit rate or data transfer rate is the average number of bits, characters, or blocks per unit time passing between equipment in a data transmission system. This is typically measured in multiples of the unit bit per second or byte per second.Megabit per secondA megabit per second (Mbit/s, Mb/s, or Mbps; not to be confused with mbit/s which means, literally, millibit per second) is a unit of data transfer rate equal to:1,000,000 bits per second or1,000 kilobits per second or125,000 bytes per second.
If the phone isn't charged, it won't show up on your computer. Make sure it's at least charged a bit before plugging it in. Or, try another cable. I think the cable is out of work.
Basically the baud rate can never be greater than the bit rate. Baud rate can only be equal or less than the bit rate. However, there are instances that baud rate maybe greater than the bit rate. In Return-to-zero or Manchester encoding, where there are two signaling elements, the baud rate is twice the bit rate and therefore requires more bandwidth.