A misspelled "Rule of Thumb"
There is Rule in UGC norms about teaching load of Assistant Professors. I did not find any Rules as per AICTE. The teaching load of Assistant Professors is 16 and of Associate Professors and Professors it is 14 as per UGC Gazette.
These are rule of thumb formulas but close to a manufacture's chart. for fiber core wire rope square the diameter times 42 = NBS Example, 1/2" x 1/2" x 42 = 10.5 tons UBS (Ultimate breaking strength) or NBS The formula is the same for IWRC, but use 45 as the multiplier, because of the higher strength in the rope. Example, 1/2" x 1/2" x 45 = 11.25 ton
Insulation resistance is temperature-sensitive. When temperature increases, insulation resistance decreases, and vice versa. A common rule of thumb is insulation resistance changes by a factor of two for each 10 DegrC change. So, to compare new readings with previous ones, you'll have to correct your readings to some base temperature. For example, suppose you measured 100 megohms with an insulation temperature of 30 DegrC. A corrected measurement at 20 DegrC would be 200 megohms (100 megohms times two).
Engineers tend to use the most appropriate notation for a given situation, and in many situations, 847 will be a perfectly fine way of expressing the number 847 for an engineer.The expected answer to this question most probably is 0.847E3 though, which indicates a base number (0.847) is to be multiplied by 10 to the power of 3 (103=1000), thus 0.845E3 = 0.847 * 103 = 847.Engineering notation becomes more appealing with much larger numbers, or numbers much smaller than one (regardless of the number's sign). As a rule of thumb, you should consider using engineering notation for numbers that make you squint and count the zeroes. Straight-forward numbers such as 847 do not benefit from such complication. Engineers are pragmatic people.
A simple machine uses a single applied force to do work against a single load force. Ignoring friction losses, the work done on the load is equal to the work done by the applied force. The machine can increase the amount of the output force, at the cost of a proportional decrease in the distance moved by the load.
Your heart makes the thump thump
According to the Song "Frosty the Snowman" The sound he makes as he ran through the town was: Thumpety thump, thump, thumpety thump, thump! Thumpety thump, thump, thumpety thump, thump, look at Frosty go. Thumpety thump, thump, thumpety thump, thump, over the hills of snow.
Citizen Baines - 2000 The Whole Thump-Thump-Thump 1-2 was released on: USA: 6 October 2001
thump, thump, thump:)
A thump word can be used to add emphasis or intensity to the sentence. For example, "The car came to a sudden thump as it hit the pothole," where "thump" emphasizes the abruptness of the car hitting the pothole.
"thumpity thump thump thumpity thump thump look at that snowman go, thumpity thump thump thumpity thump thump over the hills of snow"
Thump thump!
Thump thump!
The blood rushing through the valves as the open and close - thump-thump-thump. . .
thump thump!
a thump thump
There is not set age for when a doctor is suggested to retire. The rule of thump is always that a doctor must retire when old age effects his or her performance.