scfh is a measure of fan capacity. standard cubic feet per hour measured at 60 degrees fahrenheit and 14.696 psia. (22C and 1 atmosphere)
Equal in what way?
Cool Air! As the heated air rises the heated air starts getting cool. This is because the higher the air is the colder it gets. Then the heated air will be replaced with cold air. As the cold air then comes down near the ground the cool air will become heated because of the sun. Heated Air - Cool Air - Cold Air And On And On It Goes
Warm air is above cool air.
It is because, once the air is inhaled, the lungs absorb the oxygen in the air and releases only the remaining stale air. The air that goes in has a higher % of Oxygen and the air that comes out has a higher % of Carbon di oxide.
The properties of air are:1.Taste2.Weight3.Colour4.Air mass5.Density6.PressureDone by:Humayoon Mohiuddinactually it only has 5 these are the correct properties:air is fukedThe Properties of air is 1.Air Has Weight2.Air Has Pressure3.Air can be Compressed4.Air Takes up Space5.Air Has Temperature
Equal in what way?
SCFH stands for standard cubic feet per hour
1 mmcfh = 1,000 mcfh = 1,000,000 scfh
110 - 130 Scfn is what in psi
divide by 60
times 60
"SCFH" stands for Standard Cubic Feet per Hour. This is a volumetric flow rate which is used for gases such as air. Since the volume of gases can change dramatically by pressure, a "Standard" is needed to bring the volume to a commonly known value (at sea level). The volume for liquids is typically incompressible and thus does not need a "standard" pressure when calculating volume or volumetric flow rates.
scfh is "standard cubic feet per hour" and cfh doesn't neccessarily mean "standard". Standard conditions are stanard temperature (293 K), and standard pressure (1 atm, 101,300 Pa).
1 cfh = 1 mbh
1 scfh = 0.4719474 ltr/min1 scfh = 0.4719474 ltr/minNop!!1 ft^3/h = 28.316847 ltr/h (exactly) = 0.4719474.. ltr/minThis expression is absolutely correct, but the following shall be noted:the "standard state" in "English Unit" usually means 60℉ and 1 atmosphere, while the "normal state" in "Metric Unit" is based on 0℃ 1 atmosphere.1 scfh = 1 std. ft^3/h = [0.4719474 * (460+32)R/(460+60)R] N ltr/h= 26.79209.. N ltr/h = 0.446535 N ltr/minSo the word 'standard state' shall clearly be definedStefano Kim, Korea
You can put Air in Air Shocks Not Air Bags
What is you question about Air to Air Refueling?