0
What is significant about the contents of the destination address field?
Wiki User
∙ 8y ago
The destination address field in a frame refers to the physical (or MAC) address of the destination node.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What value in the address field of a Frame Relay header identifies the destination of the frame?
DLCI
What value in the address field of frame relay header identifies the destination of the frame?
DLCI
In IPv6 which field is used in conjunction with the authentication header and the destination address to identify the security association to be implemented for the AH?
SPI field
Which field are contained within an IEEE Ethernet frame header?
1)Source and destination MAC Address 2)FCS Field
Which field in the layer 2 header is used to verify the data has not been corrupted in transmission?
Destination address
What happens when a host station receives a frame that contains its own MAC address in the destination field?
ignored
Which field in an IPv4 packet header will typically stay the same during its transmission?
Destination Address (I.P. ) will stay the same during transmission. But be careful! Only if it is Ip address. However if it is MAC it will change as it travels thru diferent routers with different MAC addresses to get to the destination Ip address (which does not change)!
A user sends an HTTP request to a web server on a remote network During encapsulation for this request what information is added to the address field of a frame to indicate the destination?
When a user sends an HTTP request to a web server on a remote network, the information needed to perform the action is added to the address field of a frame to indicate the destination during encapsulation.
What is the role of the address field in a packet travelling through a datagram?
There are two address fields. Source is the IP address the packet came from and destination is the IP address the packet is meant to be delivered to.
Where is an email sent after you type it?
You enter an email address in the TO field. The Electronic Message may take many routes to its destination, before the person receives it.
What is difference between relative file and indexed sequential file?
Relative:- 1. In this mode the content of the program counter is added to the address part of the instruction to obtain the effective addressed. 2. Effective Address = Contents of the program counter + contents of address field. 3. No extra index bit is used. 4. Example:- EA = [ BX ] + [ SI ] + disp. EA = [ BX ] + [ DI ] + disp. Indexed:- 1. In this mode of addressing an attempt is made to avoid the use of two addressed for an operand. 2. Effective Address = Address field + contents of the specified - index registers. 3. In this extra index bit is used. 4. Example:- EA = [ BX ] + [ SI ] EA = [ BX ] + [ DI ]
What are the differences between preindexing and postindexing?
post indexing First, the contents of the address field are used to access a memory location containing a direct address. This address is then indexed by the register value. pre-indexing An address is calculated as with simple indexing. In this case, however, the calculated address contains not the operand, but the address of the operand.
