The height of and interior wall (the ceiling) is 8ft. The width is up to you. There is no standard...
3 1/2 inches before drywall standard walls have 1/2 inch drywall so 4 1/2 inches for a standard wall
The standard thickness of a typical interior sheetrocked wall is 4 1/2" and 4 3/4" thick. Most apartments are built with a sheet of 1/2" or 5/8" GWB on each side of a 2x4 which is actually 3 1/2" wide.
Muptily the height x width then subtract any window or door opening using the same height x width method. This should give you a close per gallon needed based on the coverage of the paint.
form_title= Best Interior Paint form_header= Find the best interior paint for your home. What rooms will you be painting?*= _ [50] Do you need to remove an old wall coverings?*= () Yes () No What is your decor theme?*= _ [50] What color paint do you need?*= _ [50]
It is not necessary to use a primer for interior walls, but using one helps with adhesion and smoothness of the paint.
3 1/2 inches before drywall standard walls have 1/2 inch drywall so 4 1/2 inches for a standard wall
The width would be the height.
nil
That would depend on the material used. If it's block, 8 inches , if it's a stud and two layers of 5/8 dryawall than it would be 4-3/4 inch. There is no set standard for the wall thickness.
The width of a standard American bathtub is between 32 and 42 inches. The size will really depend on what material the tub is made from and whether or not is a wall to wall or a corner tub.
Measure the height of the wall from floor to ceiling. Measure the width of the wall. Multiply height x width = square footage. For square yards, divide the square footage by 9.
About 1.5 meters
3 mts
About 2.5 metres.
Multiply the height by the width Area = length x width or (height x width in this case)
The standard thickness of a typical interior sheetrocked wall is 4 1/2" and 4 3/4" thick. Most apartments are built with a sheet of 1/2" or 5/8" GWB on each side of a 2x4 which is actually 3 1/2" wide.
It is a length of wall covering that is 1 yard long and whose width is the standard width of that product.