It is not necessary to use a primer for interior walls, but using one helps with adhesion and smoothness of the paint.
To make the wall smooth i think
Besides a few shades of black, white primer will reflect more light back than a gray primer under a paint color that doesn't cover well. Gray is often used under dark reds which would normally require several coats of paint to cover, The lighi that would normally be reflected from a white primer underneath the paint is, instead, absorbed by the gray primer, giving the illusion of an opaque surface. White primer is used under any light paint that covers well. It can also be tinted to the color of many off white or pastel wall colors to help ensure coverage using fewer coats.
It's not the topcoat that's important, it's the surface the primer needs to adhere to.
All the information I read on Tinners paint refers to it as 'anti-rust' exterior metal paint . - I certainly wouldn't put a latex primer on anything outside. I would use Kilz original as a primer.
Latex paint can be used as a primer but the results may not be what you want. Primer is less expensive than latex paint and has special qualities that create a seal and help the finish layer of paint adhere better. In the long run you will save time and money by using the correct product for the job.
The most popular color paint in interior design and real estate is white. A lot of bedrooms have white paint even under their wallpaper designs.
Primer is under the paint.
Besides a few shades of black, white primer will reflect more light back than a gray primer under a paint color that doesn't cover well. Gray is often used under dark reds which would normally require several coats of paint to cover, The lighi that would normally be reflected from a white primer underneath the paint is, instead, absorbed by the gray primer, giving the illusion of an opaque surface. White primer is used under any light paint that covers well. It can also be tinted to the color of many off white or pastel wall colors to help ensure coverage using fewer coats.
It's not the topcoat that's important, it's the surface the primer needs to adhere to.
All the information I read on Tinners paint refers to it as 'anti-rust' exterior metal paint . - I certainly wouldn't put a latex primer on anything outside. I would use Kilz original as a primer.
There are many good latex primers that will work under oils.
Latex paint can be used as a primer but the results may not be what you want. Primer is less expensive than latex paint and has special qualities that create a seal and help the finish layer of paint adhere better. In the long run you will save time and money by using the correct product for the job.
paint it with a universal primer such as "BLOCKER" brand first Yes, you can. My preference is to use oil base primer under latex (water base) paint, because in my experience the oil base primer lasts longer. It stays stuck to the wood longer. I think latex primer is basically bogus. I have wasted a lot of time using latex primer and it comes loose and I have to sand it all off and use oil base primer. Latex primer does not work. Just like latex paint sticks poorly to bare wood. Latex paint does not have much "stick" (also called "tack"). It is a thin sheet of rubber, and there is very little "tack" to it to keep it glued to the wood. Latex peels off readily, once you put a knife under an edge.
The most popular color paint in interior design and real estate is white. A lot of bedrooms have white paint even under their wallpaper designs.
The car was not prepped right. Klix- Wax & Grease remover was not use. bad primer or maybe no harder in primer. or Rust under paint. it can go on and on. I seen one car that had rust pin holes that made the paint bubble from water getting behind. I also seen a factor fender that had factory primer get painted and the paint peeled off because it was not prepped.
NO ! - woodstain does not use a primer.
Yes, the water borne latex paint manufactured today can be covered successfully with nearly any finish imaginable, including an alkyd primer. However, if possible I would exchange the alkyd with any water base primer/sealer. Costs less and the fumes aren't as offensive.
This depends in large part on what paint or finish your are going to cover your oil-finish with. First, you need to determine, if possible, if your existing oil paint contains lead. If the oil paint is over 30 years old, you should assume that it has lead and the paint should be removed before continuing. (See your local codes). If you are painting the surface with an oil-based paint, simply rough up your surface with 220-grit sandpaper, clean and paint away. If you are covering your finish with latex, you should scuff the finish with 220-grit sandpaper, clean it well and apply two coats of latex primer before applying your final coats of paint. If you are applying wallpaper, we suggest that you scuff up your oil finish, apply two coats of latex primer and allow it to dry for at least 3 days before papering.