A starting current is the first current and power produced by a machines engine or electrical device. The starting current is used to determine the engines natural strength.
what is the starting current of 2ton window ac voltas
How do you calculate voltage drop for starting motor current
The starting current of any electrical equipment which is 6 times more than that of the full load current. ex: full load current = 5 A the starting current will be 5*6 = 30 A.
While starting a motor from standstill to its rated speed, the motor has to overcome the inertia and generate enough torque to over come it. In the process the motor takes higher current during the starting. Once started and set in motion the current reduces ti its normal value. Full load current is lower than the starting current normally.
The starting current is high because when the motor is not rotating no back-emf is generated, leaving the starting current to be determined by the armature resistance, which should be low.
Motor starting current is typically 5-7 times the rated current of the motor. (For three phase induction motors)
maximum current of a 1hp
Aircon draws at their starting larger current than 16A. Call to get the Best Aircon Installation company of COOL CARE in Singapore at +65 8712 8795
A series-wound commutator motor has the best starting torque because the torque is proportional to the square of the current, and the starting current is set by a current-limiting resistor which is switched out as the motor builds up speed.
One need to know the voltage, the power factor and starting torque, to derive the starting current. The information provided in the question is not sufficient.
Assuming the Motor is IE1 Efficiency and 4 Poles, the in rush current will be 1183 A
the starting current of motors can be controlled by using an additional resistance in the beginning and gradually decreasing it.Motor starters do the same