Only makes the noise when hitting a bump, just once or twice till the next time? If so, it is the strut. Both front ones should be changed at the same time. If this is what's wrong, if you took it to a shop, it should have been the first thing they checked. If you did it yourself, it's part of the learning curve we all go through.
Center bearing should be replaceable after removing driveshaft
you will hear a rumbling or wining as you drive, especially at speed
you have a definete wheel bearing problem. have it replaced asap
The drive belt on the alternator of a 94 Toyota Corolla won't turn if the bearing has seized. The alternator will need to be replaced.
could be that one of the belt driven components, such as power steering pump, alternator....etc, has a worn internal bearing. Reason being, is when the new belt is replaced, the tension is usually tighter causing more stress on the pulley and bearing.. Tom
This could be the breaks needing replaced, could be a wheel bearing that needs replaced.
That is a bearing in the centre of a crankshaft or drive shaft.
The cooling fan has thrown a bearing. The hard drive is loud and should/could be replaced. If it only makes noise when the led for the drive is on then it is probably the hard drive. It was probably dropped in shipping. Thank the shipper for that one.
It may be that the friction plate is binding on a bad bearing or bushing and that would make the rubber deteriorate on your drive wheel.
The bearing near to the drive end is outboard bearing and the bearing in non drive end is inboard bearing.
how do I get to the front bearing on a geo 4 wheel drive
drive shaft carrier bearing needs to be replaced