14ft lbs ea.
according to the Toyota service manual it is 58 ft/lbs this for clean dry bolts make sure also to clean out the bolt holes in the engine block before assembly
They need to be torqued to 22 lb.ft and then turn them 180 degrees in 2 steps start from the center and work out. Read more: 1998 honda accord 2.3L head bolt torque specs - JustAnswer http://www.justanswer.com/honda/1k1jk-1998-honda-accord-2-3l-head-bolt-torque-specs.html#ixzz1pntfWIDI
cylimder head bolts stage 1 22 /lb-ft stage 2 48 /lb-ft
22 Ft. lbs on the 4 headbolts. 7 ft. lbs. on the two side bolts
on a 2005 Honda foreman 500 hundred it is 22 ft-lb on the 8 mm bolt and 12 ft-lb on the 6 mm bolts
The cylinder head bolts need to be torqued at * 10MM bolts 22 FT-LBS * 12mm bolts 26 FT-LBS
the answer is two steps first 22 ft lb the second is 49 ft lb
22 ft lbs
22 ft lbs
20-22 ft lbs.
30 nm or 22 inche lbs first run then tourqe 90 degrees third run an aditional 90 degrees all in the proper sequence
22 to 25 Ft/lbs
18 - 22 ft./lbs.