An electrical network is an interconnection of electrical components (e.g. batteries, resistors, inductors, capacitors, switches) or a model of such an interconnection, consisting of electrical elements (e.g. voltage sources, current sources, resistances, inductances, capacitances). An electrical circuit is a network consisting of a closed loop, giving a return path for the current.An electric circuit is a path in which electrons from a voltage or current source flow. Electric current flows in a closed path called an electric circuit. The point where those electrons enter an electrical circuit is called the "source" of electrons. The point where the electrons leave an electrical circuit is called the "return" or "earth ground". The exit point is called the "return" because electrons always end up at the source when they complete the path of an electrical circuit.
The part of an electrical circuit that is between the electrons' starting point and the point where they return to the source is called an electrical circuit's "load". The load of an electrical circuit may be as simple as those that power electrical appliances like refrigerators, televisions, or lamps or more complicated, such as the load on the output of a hydroelectric power generating station.
An electrical network is an interconnection of electrical
elements such as resistors, inductors, capacitors,
transmission lines, voltage sources, current sources, and
switches.
An electrical circuit is a network that has a closed loop,
giving a return path for the current. A network is a
connection of two or more components, and may not
necessarily be a circuit.
A gate is a specific instantiation of a circuit that is intended to perform some boolean logic function.
There are many other specific instantiations of a circuit that perform other functions unrelated to boolean logic (e.g. amplifier, oscillator, modulator, demodulator, mixer, converter, circulator, gyrator, tank, rectifier, voltage doubler, voltage trippler, voltage regulator, current regulator, power inverter, low pass filter, high pass filter, band pass filter, band reject filter, automatic gain control, automatic frequency control, phase locked loop, impedance matcher, clipper, limiter, operational amplifier, integrator, differentiator, multiplier, summation, logarithm, antilogarithm, voltage comparator, delay, debouncer, register, latch, multiplexer, demultiplexer, encoder, decoder, digital comparator, line driver, line receiver).
A gate is one type of circuit, there are literally billions of different types of circuits
Volt difference causes a short circuit! ChaCha
a single circuit has only one source of energy, like a battery compartment (no matter the amount of batteries) a double circuit has two sources of energy, like two batter compartments
The main difference between MCB, RCCB, and Isolators Isolators are generally used in power system while on the other hand, MCB is the circuit breaker. Isolators are manually-operated device, and on the contrary, the circuit breaker is the automatically-operated device.
MCB stands for miniature circuit breaker , which provides protection against over current. the setting is not adjustable. RCB stands for residual circuit breaker which provides protection against earth fault as well as over current. It monitors the current difference between phase and neutral and if the difference is more than rated value say 200 milli amps it will trip.
Cartoon Network has been using Chicky Robot for Robot Chicken this season. They are the same.
difference between series is one pathway through circuit,difference between parralal is more then one pathway through circuit.
PSTN stands for Public switched telephone network PSDN stands for Public switched Data network / Packet Switched Data Network. The basic difference between two is the switching technique used. PSTN uses Circuit Switching and PSDN uses Packet Switching
a mlln circuit is a data circuit
The voltage divider circuit is a network of two or more components in series, often resistors, between a potential difference. The voltage between the components will be somewhere between the potential difference across the whole network and so divides the total voltage into one or more intermediate voltages.
Hierarchical databases organize data in a tree-like structure with parent-child relationships and a strict one-to-many hierarchy, while network databases use a more flexible model with many-to-many relationships through pointers or links between records. Hierarchical databases are faster for accessing data along predefined paths, while network databases allow for more complex data relationships but can be more complex to manage.
AnswerThe difference between the two is that internet is the world wide web and network is local.
computers
what is the difference between miniature circuit breaker and fuse
What is the difference between active attacks passive attacks in GSM network?
magnetic circit has a magnet and electri circuit has electricity
this is out of syllabus
electric potential is potential difference between two points in closed circuit. but electromotive force is potential difference in any open circuit.