Want this question answered?
What are the codes to program a zenith mbr3455 universal remote for a zenith DVD player
I have read 8046 or 8222 but did not gt them to work, purchased a $5.00 universal GE 4 device remote at wal-mart #24944 and using the auto scan on sat it was almost one of the first ones .. and would allow programming so I was able to scan and set channels. Good Luck bc
buy a universal remote.
The zenith universal remote codes to program a symphonic television are 0091, 0053, 0155, and 0126. A universal remote can be used to operate a number of brands of one or more electronic devices.
Go to Jupiter to find out
Use the link to Sentry and see what you can pull up.
45-v7-3n-6e-22-f6
The remote codes for a Zenith TV VCR combo vary greatly based on the model of universal remote. Some use 153 and 154, while others use 172.
You must access the menu fuction.Autosearch or manual add or erase channels.
Programming procedure for GE Universal Remote to Digital Stream converter box is as follows: 1. Turn on converter box either manually or otherwise. 2. Press SETUP button until light comes/stays on. 3. Press and release CBL/SAT button. 4. Press 1751 in that order on your keypad. 5. Press ON/OFF button. 6. Press ENTER button. Note: This particular code was originally designed for GE Universal Remote 24938 but will work with the 24912 model also except the MENU selection. I could not get that feature to work, however, it may be that it will work while you are still in SETUP mode...I did not try that because, fortunately, all my settings were already programmed the way I wanted them.
Zenith Codes:002113114115176182189245248274
Following are some of the top brands to universal remote controls which can work for both TV and Bose equipments. Universal Remote Control for RCA, GE, Sony, Magnavox, Phillips, Zenith, and most major brands ,One For All DirecTV RC64RBK Universal Remote Control with Wireless Antenna ,Philips 6-Component Universal Learning Remote Control and Logitech Harmony One 915000035 Universal Remote