0
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).
For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).
For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).
For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).
For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
What else can I help you with?
How is the DHCP reservation on a router used?
To enable the router to provide the same IP address to the Telnet server each time it connects to the network. In short, to provide a reliable static IP to use for Telnetting purposes.
Are IP address' assigned to the router or the location of the router?
the router is assigned an ip address.
What is gatway in networking?
A gateway, or router, connects different networks.A gateway, or router, connects different networks.A gateway, or router, connects different networks.A gateway, or router, connects different networks.
What is an IP Router?
A router that is set up to route IP packets.
Is your ip address assigned to your router or to each computer on the network?
Your Router is assigned an IP address that is known as a public IP address then your router assigns out IP addresses that are known as local IP addresses. So the answer is yes and yes!
How is dhcp reservation used on a router?
To set the same IP Address to the Telnet server each time it connects to the network.
Why can a router have a single mac address but many IP address?
The Router only has one M.A.C Address and One IP Address But, the Router can have many Connections ( Devices using the network ) That may shoe up as their IP Addresses. But the Router only Has One IP Address
Changed the ip address on your belkin n1 router and now cant access settings can anyone help?
If you have changed DHCP ip range, the ip address for your router has changed too. You can find your router ip address in your wireless adapter information.
How can you get ip address on your psp?
I believe the IP address is the address it connects to via Wi-Fi (wireless internet).
How do you enable ip routing to yes?
On a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routingOn a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routingOn a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routingOn a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routing
How do you connect the wireless router to a dsl modem?
The question would be easier to answer if you included the specific model # of the Netgear router you are trying to configure. You can not connect a netgear router or any other router directly to a DSL line unless it also functions as a DSL modem. You can connect a router to a DSL modem which connects to a DSL line.
How do you open router using ip?
You need to find out the ip which was assigned to your computer (Start->run->cmd->ipconfig). For instance, if your ip is 192.168.11.9 it means that your router is 192.168.11.x network. Most likely it will have ip 192.168.11.1. After you have found out the ip for the router, open Internet Explorer and type the ip in the address field (where you usually type urls).
