0
What else can I help you with?
How much harizontal and vertical line clearance is required in 33kv and 11kvphase to phase and phase to ground?
The minimum separation for a voltage of 34.5kV and conductor spans of 50 meters or less is 600 mm. The vertical clearance is 6.7 meters . For countries that never changed to the metric system 50 meters is about 150 feet and 600 mm is about 24 inches, 6.7 meters is about 22 feet. The minimum separation for a voltage of 15 kV and conductor spans of 50 meters or less is 400 mm. The vertical clearance is 6.1 meters.
How do you calculate voltage regulation of 33kv and 11kv distributions?
Regulation =(Obtained voltage per phase - rated voltage per phase)/rated voltage per phase *100
What is the voltage coming out of a station?
Depends on the sub station. It could be 11KV, 33KV, 66KV,110KV, 220KV, 400 KV etc
What is the base mva of 33Kv?
750MVA to 1000MVA for 33kV and 350MVA for 11kV
Explain the transmission and distribution of electricity from the generation station to the consumer?
transmission and distribution of electricity are the way of regulate voltage to the minimum rate in which can be benefit to the consumers. From generating station , voltage generated is up 16/25kv which step up upto 330kv this generating voltage now step down in the transmission station through the step down transformer which is 132kv this voltage now transmitting to distribution station where voltage now step down to 33kv, this 33kv now stepdown to 415v for three line and 240/220v for a line for the uses of consumers.
What is the highest generating capacity in India?
33kv
What is the function of transformer 33kv?
A '33-kV transformer' is a three-phase primary-distribution transformer, used in the UK's electricity system to step down the 33-kV primary-distribution voltage to the 11-kV secondary-distribution voltage -the lowest voltage used in the high-voltage distribution system. These transformers are categorised as 'power transformers', and are located in what are termed 'primary substations'.
What are the effects of being at end of 33KV transmission line?
The effects of being at the end of a 33KV transmission line will result in a higher voltage. This is due to variation in the perameters that dictate how the transmission is sent and received.
What ACSR conductor is used for 33kV transmission line?
Single Circuit PantherACSR Conductor
What is the acceptable value for 33KV switchgear?
33 KV plus or minus 3 percent
What is a HG fuse?
horn Gap fuse, used in 11kV & 33kV circuits to disconnect in case of fault.
Why transmission is done on 11kv and 33kv?
High voltage reduces the amount of energy wasted in transmission lines.
