0
Symptoms
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Does the Cable Unlimited Female Printer cable work with any printer?
Yes, the "Cable Unlimited Female Printer" will work with any USB or parallel cable printer.
Do you need a printer cable to set up a wireless printer?
The only cable needed for a wireless printer is the power cord.
Do you sell cable connectors for the printer cables?
Cable connectors are always avaible for printer cables.
Which printer ribbon is compatible with IBM?
It depends on the printer, but a parallel port cable or USB cable will be compatible.
Which components are used to connect a computer to a printer?
A cable or wifi. If a cable is used, it may be classed as a serial, parallel, or USB connecting cable - depending on the type of printer.
Is a network printer an impact printer?
maybe, a network printer is any printer connected via network cable
How to reset canon mg2570s printer?
1: Turn off your Canon printer. 2: Remove its power cable from the power source to ensure that your printer is disconnected completely. 3: Wait at least 30 seconds. 4: Plug the power cable back in and connect the cable to the printer. 5: Turn on the printer.
Where can someone get a USB cable for a Canon printer?
USB cables are interchangeable and generic. One can find a USB cable that connects to a Canon printer at local electronic retailers. It's best to consult your printer manual for the appropriate cable type.
What is the common connector for the printer today?
USB cable type is common printer connector
How can you be sure that a printer cable is not the source of a printer problem?
To determine whether a printer cable is not the source of a printer problem, you can follow a series of steps to rule out cable-related issues: Inspect the Cable: Examine the printer cable for any visible damage, kinks, or fraying. Pay close attention to both ends of the cable and along its length. If you spot any physical damage, it could be the source of the problem, and you should consider replacing the cable. Try a Different Cable: If possible, use a different, known-working printer cable to connect your printer to the computer. Ensure that this cable is compatible with your printer model and the computer's interface (e.g., USB, Ethernet, etc.). If the printer works with the new cable, it suggests that the original cable might be faulty. Secure Connections: Ensure that both ends of the printer cable are securely and properly connected to both the printer and the computer. Sometimes, loose or improperly seated connections can cause printing problems. Test on a Different Computer: If you have access to another computer, try connecting the printer to that computer using the original cable. If the printer functions correctly on the second computer, it indicates that the cable is not likely the issue. The problem may be related to the computer's configuration or drivers. Check Printer Status Lights: Examine the printer's control panel or status lights for any error messages or indicators related to the connection. The printer may provide specific error codes or messages that can help diagnose the problem. Update Printer Drivers: Ensure that you have the latest printer drivers installed on your computer. Outdated or incompatible drivers can lead to printing issues that may appear as cable problems. Restart Both Devices: Turn off both the printer and the computer, and then turn them back on. This can sometimes resolve communication or software-related issues. Consult the Printer Manual: Refer to the user manual or troubleshooting guide provided with your printer. It may contain specific troubleshooting steps for addressing connection issues. By following these steps, you can systematically eliminate the cable as the source of the printer problem and narrow down the potential causes. If the printer still does not work properly after trying a different cable and checking other factors, further troubleshooting or professional assistance may be necessary to identify and resolve the issue.
How can you connect a printer to a computer?
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
Which network cable should you use to connect PC to printer?
Whether your printer uses a serial port, or parallel port, or USB port, or wifi, decides what type of cable you need. Name and model of printer? Have you looked on the maker's website or user guide for instructions?
