Price is dependent on many variables and opinions vary. It depends on who made the tray, the tray's age, size, provenance of the tray, condition, desirability of the design, and whether the tray is a step above the common silver-plated tray (what embellishments does it have). Trays that have STERLING SILVER mounts are higher quality and the price would be affected by the amount of sterling added to the tray. Sterling mounts could refer to the trim around the edges (rope border), feet, handles, knobs and other decoration. A large, heavy, clean, vintage tray by a good maker with sterling mounts, in a well advertised auction where interested buyers know the item is at auction could bring $450+ compared to a solid silver tray of the same size which goes for thousands. In a retail shop in a good location, a large beautiful tray with sterling mounts could retail for more than the auction price.
its silver plated...unless it says sterling on it. this company was known for making silver plated sets.
$175.00
Pictures of Family members are always a nice touch, there are many crafts that can include pictures. for example: a serving tray with family pictures glued on the tray with a finish of polyurethane to protect the pictures from scratches an liquids.
You smell like an ash tray Your car smells like an ash tray Your house smells like an ash tray
Here's the Utility Tray removal process: Pull the tray out as far as it will go. On the left and right side of the tray (between the tray and the enclosure) there are two projecting rails that the tray slides on. Beneath each rail there is a white nylon pad (at the back of the tray) that comes to rest against a projecting piece of black plastic (a "stop") that prevents the tray from sliding completely out. With GENTLE pressure pulling on the tray, slide a narrow flat blade screwdriver between the black "stop" and the tray. Rest the blade of the screwdriver against the white nylon pad and GENTLY push the stop away from the tray until the white nylon pad slides just past the projection. You will have to allow the screwdriver to move with the tray. Continue to GENTLY hold the tray open so the nylon pad does not slip back behind the stop and repeat the process on the other side of the tray. You will need good lighting and will probably have to remove the console to have access and see what you are doing. To replace the tray, first remove the obstructions from the enclosure, and then align the slide rails with the receiving slots on the enclosure; gently pushing the tray back into poisiton. Remember, anything 1/2 thick or less can slide over the back of the tray and into the tray enclosure, so don't overload the tray. Good luck and thanks to Honda for making this an unnecessarily complex process - east to install but difficult to remove for service. Hopefully they redisigned the tray so things can't slip over the back or sides. It took longeer to type this than to remove the tray.
What is the value 06140 Reed n Barton. Serving tray
According to Shopgoodwill, a Rogers and Bro 1781 oval silver serving tray sells for about $11. This does not mean it is worth $11. A good reputable antique dealer can determine the value. It will depend on the condition.
The serving tray is worth about $25. The exact price will depend upon the condition of the tray and what it is made out of.
I think that it means certain small parts of the tray, possibly the mounts for the handles which might take heavier than normal wear are solid silver as opposed to being plated.
250
The "Sheet Rockford Serving Tray" is a vintage silver-plated tray made by the Rockford Silver Plate Co. The numbers "1875" and "369" could potentially be production codes or patterns used by the manufacturer to identify the specific design of the tray. It is recommended to do some research or consult with antique experts to determine the exact significance of these numbers in relation to the tray.
A silverplated tray is only worth about $25.00.
Now an
a dutch serving tray is used for serving food
r.wallace silver soldered tray with number 0502...12 11t....date of manufactor/value???
what is the value of a Wm Rogers Silver Bowl? Paul Revere Reproduction
Many of the trays valued in price close to $20 each. The value of each tray will depend upon its condition.