By using an anti static mat while working on the inside of your computer, you are protecting the delicate electronic components from static electricity that can damage the electronics.
A. anti-static mat B. cable ties C. anti -static wrist strap
Anti Static Wrist strap Anti Static Mat Correct tools Correct clothing
Anti static mat
You can buy an anti-static wristband, or you could stand on a rubber mat. Also there are special screwdrivers that are anti-static. But I have built 3 computers and I have never used any anti-static precautions!
Anti-static wrist band w/ alligator or ground clip. Anti-static workbench mat. Anti-static floor mat. Touch unpainted metal of computer case to discharge any buildup DO NOT touch any computer component metal contacts of chips, etc. COMMON SENSE
Increase humidity above 30%. Wear Leather shoe soles. Touch thick heavy key to the object before your skin touches it. Wear a anti-static wrist band or use a anti-static floor mat. also, if you get static shocked, try to not touch anything or anybody.
For the sensitive requirements of manufacturing and service industries, our anti-static flooring fulfills the quality requirements. They can be used for computer and call centers, operation theaters, ICUβs and diagnostic centers. We provide the safest anti-static flooring available in the market. You can buy from responsive industry online store.
You would place hardware on an anti-static mat to prevent static electricity from building up. If you don't have that, you could use other things such as an antistatic wrist strap or even antistatic bags.
do not stack boards on top of each other because you can accidentally dislodge a chip on the boards or they can fall and break. always set them on a flat stable surface away from being able to be bumped and preferably in an anti static bag or on an anti static mat.
An anti-static mat and an anti-static wrist strap are two tools you can use to help prevent static electricity from damaging computer components.If you don't have such tools, then you should take other precautions such as standing on a hardwood floor while working, and touching a metal pipe or the screw on an outlet cover before working. You should also avoid touching the pins or traces of the components. For instance, handle cards by the metal bracket and the edge of the cards. Temperature and humidity are also factors, and you should avoid working during cool, dry weather unless you follow the precautions and/or use anti-static devices.
That is an anti-static wrist strap used by electronics technicians to guard against ESD (electro static discharge) when working on sensitive printed circuit boards and other electronics. The strap connects to a work mat which is in turn connected to earth ground.
An anti-static mat is usually made of a conductive plastic. Usually, on one corner there is a snap connector. From that snap connector there is a long, (usually GREEN) wire, as well as a coiled wire that goes to a wrist strap. The green wire goes to the round GROUND connector of an AC wall socket. The coiled wire that goes to a wrist strap goes just like that. Wrap the wrist strap around your wrist. The reason for this setup is, through the green wire to the ground connector, you put both the mat and your body at ground potential. It takes the static electricity from your body,via the wrist strap, and from the mat to ground. Be VERY CAREFULL!! YOU MUST KNOW WHERE THE GROUND IS ON AN AC OUTLET TO USE THIS AS I HAVE OUTLINED. If you do not know where the ground pin is on an AC outlet, you should not use it.