The next size larger from a number 6 size screw.
The listed size of a #4 screw is 0.1120 inch. In fractions that's approximately 7/64
Metric size #6 shank, 32 is thread pitch per inch. The bigger the no. the bigger the screw size.
It depends on the size and application of the screw. If you are thinking of underhood screw compressor then they are very good compressors for running an air system. but beware of the abuse your engine will take running one of these
If they are self tapping screws, the drill bit is as thick as the solid barrel of the screw. If you want the screw to go through easily to have a nut on the other side, then the drill bit is slightly larger than thread size.
A three inch deck screw will typically hold anything.
The shear strength of deck screw is at least 100 to 110 pounds. It also has about 36,000 pounds per square inch.
The next size larger from a number 6 size screw.
Buy wheels, trucks, and a deck and screw them together
One whole deck, no jokers
Tech Deck is a brand of miniature skateboard. It has all of the working parts of an average skateboard, but it is about the size of one's finger. They often have unique designs and owners use them to do tricks.
A number 4 size screw comes from the fact that it is the fourth in a series of screw sizes. The screw sizes start at number 0 with a diameter of 0.060" and increase by 0.013" for each size larger.
what size screw to mount 32 sony bravia
38'' deck
Measure the width of the deck with a tape measure.
8.0
The average screw has only one thread which winds from top to bottom