No, on high heat guns as they vaporize the lead into toxic, fumes. A low heat Speedheater™ infrared paint remover does not. Chemicals make the paint waste hard to contain for safe disposal; dry sanding, dry scraping, and mechanically shaving require HEPA vacuums to entirely collect the toxic paint dust.
Submitted by Catherine Brooks, Eco-Strip
Oil based paints will give the best results. They offer a smoother finish that will be tougher than water based paints.
Oil based primer is the best bridge between oil and latex paints. If oil based paints are not available in your area, a high adhesion acrylic primer over a well prepared surface will also work.
Porter Paint has a full range of paints and coatings. They range from construction grade paints that are designed with price in mind up to high end premium paints that use the very best binders, pigments and mildewcides. They are sure to have a quality paint in your price range whether you are on a budget or are wanting the best of the best.
Water based paints or acrylic craft paints are the best to use on Styrofoam. Water based paints, specifically poster paints, work well with younger kids as they can get a really good and thick coverage of paint on the polystyrene shape.
No, there are some paints, like many water-based paints, that will not block air and moisture and can not be used on metal . Most solvent based paints, like an alkyd or lacquer, over a proper primer, direct to metal water-based acrylics and multi-part epoxies and urethanes can be used over metal successfully.
The best paint to use for smooth surfaces is a latex based paints especially for a lighter color paint. Oil based paints can also be used and provide a very nice finish when dried for darker color paints.
Natural bristle brushes are best when working with oil based paints.
Both the water based paints and the oil based paints can be used on the concrete fountains. However, the oil-based pains are the best as they cannot be washed easily unlike the water based paints.
Oil based paints will give the best results. They offer a smoother finish that will be tougher than water based paints.
Oil based primer is the best bridge between oil and latex paints. If oil based paints are not available in your area, a high adhesion acrylic primer over a well prepared surface will also work.
Most latex paints are water based, and can be thinned and cleaned with the same. Refer to the can labeling for specific instructions for the paint you are using.
Porter Paint has a full range of paints and coatings. They range from construction grade paints that are designed with price in mind up to high end premium paints that use the very best binders, pigments and mildewcides. They are sure to have a quality paint in your price range whether you are on a budget or are wanting the best of the best.
aircraft stripper you can get it almost anywhere
Water based paints or acrylic craft paints are the best to use on Styrofoam. Water based paints, specifically poster paints, work well with younger kids as they can get a really good and thick coverage of paint on the polystyrene shape.
Yes you can. Just make sure that you don't paint the magnets. Best paints for this job are Model and Acryllic Car Paints.
No, there are some paints, like many water-based paints, that will not block air and moisture and can not be used on metal . Most solvent based paints, like an alkyd or lacquer, over a proper primer, direct to metal water-based acrylics and multi-part epoxies and urethanes can be used over metal successfully.
A non-toxic biodegradable water based paint.