0
What else can I help you with?
How thick of wood can a jigsaw cut effectively?
A jigsaw can effectively cut wood up to 2 inches thick, depending on the type of blade and the power of the jigsaw.
What type of saw is best suited for cutting through a thick table made of wood?
A table saw is best suited for cutting through a thick table made of wood.
What is the actual size of a 1x2 piece of wood?
A 1x2 piece of wood typically measures approximately 0.75 inches thick by 1.5 inches wide and can vary slightly depending on the type of wood and any machining processes.
How much does a 2x8x10 piece of wood weigh?
A piece of wood that is 2 inches thick, 8 inches wide, and 10 feet long will weigh approximately 65-70 pounds, depending on the type of wood and its moisture content.
Does the type of wood afeect how it burns?
Yes, the type of wood does affect of how it burns. Some types of wood have a thick bark which lets thick smoke out. On the other side if it does not have thick bark it won't burn as well as thick bark.
What type of knife is best suited for cutting wood effectively and safely?
A fixed blade knife with a sturdy, thick blade and a sharp edge is best suited for cutting wood effectively and safely.
How thick is the wood against the block of an exterior door?
You should have three inches of wood on each side of any residential door.
What is the best wood to cut on a sawmill?
? i don't remember, but i think it is any wood if it is thin or thick wood, use thin.
How thick was the iron on the Merrimack?
The CSS Virginia had two 2" plates backed up with two 4" layers of wood backed up with a 12" thickness of wood. So a total of 4 inches of iron and 20 inches of wood.
What is the weight of a wood pallet that is 44 inches by 44 inches?
The weight of a wood pallet measuring 44 inches by 44 inches can vary based on the type of wood used and the design of the pallet. Generally, a standard wooden pallet of this size typically weighs between 40 to 70 pounds. For precise weight, it's best to check the specifications from the manufacturer or supplier.
What is the width of a wall?
It depends on the type of house you have. If you live in a typical American Vinyl Box Style house then the outer walls are built with 2x6s and are roughly 6 inches thick. The inner walls are 4 inches thick. Most inner, non-load-bearing walls in most buildings are either 4 or 6 inches thick. In old buildings (older than 100 years) the walls might be 3 inches thick or just clapboards and are the thickness of the wood (excluding studs). Brick walls can be anywhere between 6-12 inches depending on the load they bear.
What is the actual size of a 1x2 wood board?
A 1x2 wood board actually measures 3/4 inch thick by 1 1/2 inches wide.
