0
You will need to take a bolt and attached the fence panel to the post and screw together. Depending on the size of the fence, you will need to consider if you will need a large bolt or a small bolt to hold the fence together.
Wiki User
∙ 14y ago
Wiki User
∙ 14y agowe do it all the time you either use a male female ... or a wall mount hinge ...you may have to tack weld it
Add your answer:
Earn +20 pts
How do I go about putting up some temporary fencing?
T-bars (or T-posts) can be bought at a local hardware store and struck into the ground. You can also buy some PVC fabric to attach around these posts to create a temporary fence.
Where can you find and buy steel fence posts and who has the best deal?
You should be able to find steel fence posts at any local home improvement store, such as Menards or Home Depot. It will be easier to get the best price when you know exactly what you need.
How To Install A Chain Link Fence?
If you have animals or children and are looking for a great, inexpensive way to keep them safe and protected while in your yard, you should consider installing an aluminum fence. Aluminum fences are a cheap, fast and easy way to keep the things you want in your yard and the things you do not want out. Aluminum fences come in panels when you purchase them and can be ordered from any Home Improvement store like Home Depot or Lowes. First you need to take an accurate measurement of the area you want to fence. The home improvement store will use your measurements to order the appropriate amount of fencing panels, posts, and fence post caps for your yard. Once the fencing material is delivered you will want to lay out the plan for your fenced area. The best way to mark your borders is to use landscape paint. String can also be used but can be tampered with. Place your post cap onto your post and secure it with a rubber mallet. If you have already marked your post holes you are ready dig them out and begin placing the posts inside. Be sure to use a quick dry cement so you can be sure your posts will stay in place. After you install your gate in the spot you would like it to be, make sure it works the way you want it to. Finally you can install the rest of your panels around the perimeter you have outlined. If you did not purchase fence panels that came pre then you will half to buy a roll of chain link fabric when you buy your posts and post caps. Using chain link fabric rolls do add additional time to your job but will also work for your fence. After you set your posts, you will need to apply the top rail of your fence between the posts and then unroll the chain link fabric. Slide a tension bar into the fabric, lift the fencing up to the fence, and attach the fencing to your posts. Make sure to cut away any excess chain link fabric and adjust all of your tension bars.
Where can I buy preassembled wood panels to construct a fence around my home?
Most any large, home improvement store has pre-assembled wood panels as well as the posts and accessories you need to create a fence. Take the measurements and consider the placement of gates, then visit the store to speak to an expert about which panels would best suit your needs. Any of your local stores such as Lowes and Home Depot are going to carry these. You can also buy them off of websites like backyardborders.com and greatsouthernwood.com
Has anyone used a fence posts called the z post?
Yes! The Z Post is the best fence post I have ever used! It is a metal fence post for wood fences. Its is powder coated like wrought iron. It is a gret post. HIGHLY Recommend!
What utility do different types of wire fence panels provide?
This ranges from thin wires to thick wires for making the home garden look more beautiful to basically just securing a safe premise. Decorative wire fence panels really provide a nice look for most homes and gardens. But thick wire fence panels tend to work best for industrial and factory areas as well as for places like zoos where stronger fencing is required.
How do you build a cow pen for one cow and how big does it have to be?
First of all, there is more than one source to build your pen from. You can build it using boards, or you can use panels designed for holding cattle. The panels are often the cheapest to buy and quickest to set up. If you want to maintain the panels and keep them there for a long time, you can pound in fence posts to a depth of around 2 to 3 feet (depending on the kind of soil where you live) and chain the panels to them. If you have 10' long panels (which is standard), then you should pound posts every 8' to 10' as well. Make sure you attach a couple gates, one man-gate and another gate (probably best would be two 10' gates), so you can get in the corral without having to take apart the panels themselves, and also allow your bovine access to pasture. As far as space is concerned, the minimum allowable space for one 1000 lb cow is 300 ft2, and/or, a 1- to 2-acre pastured paddock. DO NOT forget to accomodate for area to feed, water, and access to mineral for her.
Fence Repair?
Fence repair is a lucrative business because the majority of do-it-yourself homeowners don't know or don't care about the proper techniques and materials necessary for the proper installation of a fence. The problems that arise from improper or inadequate installation are two-fold. The fence will either fail spectacularly in a particularly violent storm or it will slowly, but inexorably, succumb to the natural upheavals and settling of the soil. The first step in repairing a fence is not the most obvious. The rails and slats can be always be affixed at the end. The primary repair should start with the posts. The use of a level should ensure that the posts are plumb in both directions. If not they should be dug out and replaced being sure to keep them in line with the undamaged posts. Once the support posts are properly aligned and installed, the repair of the non-structural parts of the fence can begin. Reattach the upper stringers, also known as rails. These are the lengths of wood that stretch between the posts and should be secured with the appropriate metal supports or with wooden support blocks from underneath. Now, attach the bottom rail. Be sure that it is level and in line with the other, undamaged, bottom rails. It may be necessary to remove some soil to allow the rail to sit properly. Do not skip this step as it is important as it will affect the final aesthetic appeal of the fence. Once this installation is complete, measure, cut and nail the vertical fence slats so that a level line is created along the top of the fence. Finally, if necessary, stain or paint the fence to match the pre-existing structure. There is no doubt that a sufficiently destructive storm will destroy the best designed and installed fence. Nevertheless, the proper installation and the proper repair of a fence is the cheapest alternative in the long run.
Why are cattle panels getting so popular in farms and ranches?
Panels are far more easier to put up as a fence--not to mention much quicker--than any other type of fence, being barbed wire fencing, wood board fencing and hi-tensile fencing, and is best for areas that experience "high-traffic," or areas where cattle tend to gather frequently putting pressure on fences. Such high-traffic areas are handling facilities, sacrifice corrals and working/holding corrals. Stand-alone panels are gaining more popularity than the standard or temporary panel fencing that require posts to be pounded down or panels to be attached together in such away that they'll stand up by themselves. Stand-alone panels just need a tractor with a loader and an operator with adequate hand-and-eye coordination to place the panels and move them around to for the corrals you want.
How much do steel fence posts cost?
It depends on your location. Whether its for a driveway or just for your garden, terraced houses or mansions. They will rust over time so that's one drawback but they will be sturdy and withstand high winds and wont be broken easily. The best option is to list the pros and cons of getting one.
What tool would you use to attach mounting posts to a case?
Generally, best tool to use for attaching the mounting posts inside a PC case is a socket of the correct size attached to a hand driver. If you are careful, you can use pliers, but that is not ideal. If the mounting posts are nylon, you'd want to be more gentle than if they are brass or stainless steel.
How can I determine what size fence panels would be best for my backyard?
It would depend on what you are trying to keep out of you backyard. If you want to just keep out the neighbors dog you can buy some regular size panels or longer panels can be used to add flair to your backyard. In some cases building codes will dictate the size fencing that can be used. If there are no code restrictions then it is up too your preference.
