0
What else can I help you with?
What is the boiling point of water at 100 psi gage?
At 100 psi gauge pressure, the boiling point of water is approximately 324.7°F (162.6°C). This is higher than the standard atmospheric pressure boiling point of 212°F (100°C) due to the increased pressure causing the water to boil at a higher temperature.
What is the boiling point of water at 100 psi?
Oh, dude, you're really putting the pressure on me with this one! So, at 100 pounds per square inch (psi), the boiling point of water is around 327°F (163°C). Just remember, don't try to cook your pasta at that pressure unless you want it to turn into mush!
What is the boiling point of ethane at 175 psi?
The boiling point of ethane at 175 psi is approximately 137°F (58°C).
What temperature would water boil at if the pressure was 5 psi absolute pressure?
At 5 psi absolute pressure, water would boil at approximately 165°F (74°C). This is lower than the normal boiling point of water at standard atmospheric pressure (212°F or 100°C) because the lower pressure reduces the boiling point of the water.
A 10 psi radiator cap will raise the boiling point of coolant how degrees Fahrenheit?
the boiling point of the water will raise 3 deg. frht. for every pound of pressure the cap is rated for. a 10lb. cap will raise the boiling temp to 242deg. frht.
How much will the boiling point of coolant be raised going from a 15 psi cap to a 17 psi cap?
about 5 degabout 5 deg
Melting point and boiling point of Garnet?
what is the melting point of spessartite garnets under normal atmospheric pressure, and what would be the melting point and the fusion point of spessartite under 2000 psi.
How can you get water to boil at 170 degrees c?
Water at ambient atmospheric pressure boils at 100C. One way of raising the boiling point is to raise the surrounding pressure. If you raise the pressure surrounding the water to about 93 psi above atmospheric, it will boil at about 170C. Do not try this at home! Boiling water at this pressure is extremely dangerous and can severely burn you.
At what pressure does water boil?
Although we usually see water boiling at close to 760 mm Hg (14.7 psi) and 100oC it will boil at almost any appropriate combination of temperature and pressure up to the critical point of water at 373,94oC and 22,060 kPa.
Does a mix of coolant and water have a higher boiling point than water alone?
Yes. Water boils at 212 degrees. A 50/50 mix of water and antifreeze boils at 223 degrees. The temperature of the coolant can sometimes reach 250 to 275 F (121 to 135 C). Even with ethylene glycol added, these temperatures would boil the coolant, so something additional must be done to raise its boiling point. The cooling system uses pressure to further raise the boiling point of the coolant. Just as the boiling temperature of water is higher in a pressure cooker, the boiling temperature of coolant is higher if you pressurize the system. Most cars have a pressure limit of 14 to 15 pounds per square inch (psi), which raises the boiling point another 45 F (25 C) so the coolant can withstand the high temperatures. Antifreeze also contains additives to resist corrosion.
What is boiling temperature of water under 40 psi at sea level?
At sea level, water boils at 212°F (100°C) under normal atmospheric pressure. However, with an additional pressure of 40 psi, the boiling temperature of water increases to around 257°F (125°C).
What is Chlorine's boiling point and melting point?
Well, darling, Chlorine's boiling point is -34.04°C and its melting point is -101.5°C. So, if you're looking to boil or freeze some Chlorine, now you know the temperatures to work with. Just don't go inhaling the stuff, unless you're into that whole suffocating and burning sensation.
