9006 on the low beams, 9005 on the high beam.
How do I change the low beam bulb in a gmc sierra 2005?
change the light bulb that does not go on, on low beam, it possible that the wire inside the bulb for low beam is broken
No, because the lamp is a dual beam and should be going through the same circuit. See sources and related links below for more bulb/lamp information.
Change the whole headlamp bulb. Should be a H4.
9145
I purchased a halogen low beam replacement bulb for my 2001 TL from a NAPA autoparts. Be prepared to pay though, one bulb set me back $91. I'm sure most autoparts stores (autozone etc) will carry these.
How do you change the number plate bulb on mercede E220 2001?
i had same problem,but i connect high beam of right hand side wire with left side high beam wire(by using extra wire between them) it is working like this__ i i ( left hand beam bulb)i i
Typically the low and high beam are H7 bulbs. The day time running light (DRL) bulb is a P21W bulb (1156 is an acceptable substitute).
Most likely its a bad low-beam bulb or a fuse issue but I'd check the sockets/harnesses for corrosion, check the high beam switch, check wiring for shorts. See sources and related links below for bulb information.
to do this, you go to your auto parts store(lord co, walmart, Canadian tire) and you buy a light bulb that fits your model car. You can't just buy a low beam because the light for it has a low and high beam built in.
You can access the low beam headlight bulb from the engine compartment. Push the bulb holder in and turn. The bulb will come out.