35 KVA generator using for load 100 meter length which cable need to used
I assume you are asking about an inverter that uses a 12V battery to supply 120VAC. If so, depending on the efficiency of your inverter, the battery current will be around 130 to 140 amps at full load. For that current, the smallest cable you would want to use is 2/0 (two-ought). If your cable length is over 5 or 6 feet you would want even larger cable, perhaps 4/0 to minimize voltage drop. Make or have made the proper crimp lug terminations at each end of the cable. Do not scrimp here! Improperly made connections will generate heat, and could ruin the equipment or even start a fire. If the wiring runs through a vehicle chassis, then be sure to install a fuse at the battery! If cables this size were to wear through on a sharp metal edge and short together, there will be more than enough heat generated to start a fire. Be safe!
Yes. 1500 mA = 1.5 A
Potential Difference across a resistor is given by, Potential Difference = Resistance * Current = 1500 * 0.075 = 112.5 Volts
$3. $1.00 for the bulb and $2.00 for the battery
Take the plug in your hand, and insert the plug into the wall outlet.
There are 1,000 meters in a kilometer (kilo means thousand) 1,500 meters is 1.5 kilometers.
Invalid conversion: square meters is a measure of area and meters is a measure of length or distance.
The oil perisher for 1500 KVA generator is used for the lubrication purposes.
A km is 1000 meters, so 1500 meters is 1.5 km. 1500 meters is of greater distance.
1 meter ~= 3.28ft => 1500 meters ~= 4921.26ft.
1500 meters = 0.932056788 miles.
1500 meters = 0.932056788 miles.
1500 meters = 1.5 kilometers
Assuming a block shape, any three numbers with a product of 1500 will work. Such numbers would represent the length of the sides, in meters.
MGS1500HV is the oil pressure for a 1500KVA generator.
1500 kilometers = 1.5 million meters 1500 m = 1.5 km
A millimeter is a unit of length and a square meter is a unit of area, so they can't be converted from one to another. If you mean 1500 square mm, we can convert that to square meters in the following way: a square meter has 1000 mm on a side, so the total area is just that squared, or 1,000,000 (1 million) square millimeters per square meter. For the final step, divide 1500 by 1000000 to get .0015 square meters.