On a 230-volt circuit, the cable should be suitable for 13 amps. The size is 1.25 mm2 or 1.5 mm2.
Yes.
You can draw less current, half the current gives half the amount of volt drop. Or use a thicker cable because doubling the cross-section area would also give half the volt drop.
In North American homes, new homes are prewired to use a 40 amp circuit. A 40 amp two pole breaker in the distribution panel protects a #8 three wire cable. This cable connects the 240 volt supply to the range and oven.
A 10 amp charge will only output 10 amps and 12 volts. So, if you want to charge thee 12 volt batteries hooked in series you will have to disconnect the positive cable from each battery and charge then individually. You cannot charge three 12 volt batteries hooked in series. That requires a 36 volt charger.
YELLOW
Brown black and ground (yellow=green). The brown and black can alco be black and blue and brown and black
On a 230-volt circuit, the cable should be suitable for 13 amps. The size is 1.25 mm2 or 1.5 mm2.
The Adaptor that came with your Wii cable, hopfully, (the square box on the cable) Burns out and you now have to buy a new replacement Cable.
500v
Yes.
red
If you are referring to the main battery cable use 00 guage cable.
10A
In North America the cable colour coding is Red and Black, usually used for the current carrying conductors. The third wire is White and it is used as the neutral on a three wire electrical circuit.
No. A volt-ohmmeter will not check insulation. To check cable insulation you need a special device (called a megger) made for the purpose that imposes a high voltage and measures current leaks.
With a link cable (GameBoy Colour)