Want this question answered?
Many clarifying shampoos use alkaline ingredients to swell the hair shaft and allow the surfactants to penetrate more deeply. Most hair relaxers use a strong alkali to soften the hair, break the side bonds of the hair and remove curl. In addition, many conditioners and moisturizing shampoos use acidic compounds to contract the hair shaft, smoothing it and locking in moisture.
Tail Shaft is the section after the propeller shaft of a shift. Any shaft is always placed farthest from the head, where the power is applied.
The shaft locks when power not applied.
A Reverse Shaft is the shaft which rotates in the opposite direction of the engine driver shaft with the help of meshing of gears mounted on it to the gears mounted on engine driver shaft when reverse gear is applied. The reverse shaft allows the vehicle to move in reverse direction. Sanjay Singh Rathore (ME 3rd year) M.I.T.Mandsaur
Best to consult an owner's manual for the vehicle being worked on and nut & shaft in question, as the torque specification can vary greatly depending upon what is being held in place, composition of materials involved, and why the shaft needs a nut...
All bearings and bushings have a basic stiffness. When you apply load on the shaft the shaft will move, and so the stiffnes can be calculated from the ratio of the applied force to the absolute value of movement.
The “load” is the force applied to a bearing. The “radial load” is the force applied perpendicular to the shaft. The “axial load” is the force applied in the same direction as the shaft. Deep groove ball bearings sustain both radial load and axial load coming from both directions at the same time.
The most common ingredient in shampoos is detergent, which will often be found as Ammonium Lauryl Sulfate. The wax glycol distearate is added to make shampoos opaque and pearlescent. Two widely used preservatives, DMDM hydantoin and imidazolidinyl urea are found in many shampoos, to prevent fungal and bacterial spoilage. They release formaldehyde to kill germs. Ingredients like citric acid are added to acidify the shampoo, keeping the cuticle smooth and lying flat on the hair shaft.
Force that is applied perpendicular to the axis of a bearing's shaft. Radial loads are also called rotary loads. Regards, Antony
The simplest pool cue shafts are simply turned on a lathe following a template to produce the 13 mm or 14 mm tip, followed by the taper, and then to the mating surface to the butt. The proper mating insert is selected and the shaft is drilled and it is inserted. The tip is applied, the tip properly turned and shaped, and the shaft is complete. In most cases, the shaft is finished with the butt however.
The rear drive shaft on any rear-wheel-drive vehicle is the link between the engine/transmissioni combo and the rear end. It's through this that all the torque developed by the engine is applied to the rear wheels. Nathan
The rear drum is held in place with a nut on a tapered axle shaft and a key way. To remove it correctly with out damage, a puller is used. The puller is bolted to the wheel studs and pressure is applied to the end of the axle shaft.