Bulb brightness is measured in lumens which express the amount of light produced, while the electric power used is measured in watts.
The typical efficiency of some different types of bulb is:
Incandescent 12 lumens per watt
Halogen 17 lumens per watt
CFL (compact fluorescent) 50-60 lumens/watt
LED (light-emitting diodes) 90-100 lumens/watt.
The brightness of a light bulb directly has no direct relationship with magnets and wire. The bulbs brightness is determined by the wattage of the bulb. The higher the wattage of the bulb the brighter the bulbs light output.
A pencil has nothing to do with the brightness of a light bulb.
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
The wattage of bulb one uses in a bedroom lamp depends on several factors. If it is a lamp used for back ground lighting or a night lamp, one would use a very low wattage bulb. If it is for a bedroom reading lamp, one would want a stronger wattage. The biggest factor on deciding what wattage to use is the wattage suggested by the lamp manufacturer. All lamps are marked with recommend bulb wattage.
Yes, as long as the voltage is the same and the bulb has the same or less wattage. The fixture is rated at a certain wattage that can be found on a label somewhere on the fixture. Never use a larger wattage than what is stated on this label.
If the current is stronger then the bulb will be brighter.
The brightness of a light bulb directly has no direct relationship with magnets and wire. The bulbs brightness is determined by the wattage of the bulb. The higher the wattage of the bulb the brighter the bulbs light output.
The reading is much easier when you sit under the brighter bulb.
Brightness of a light bulb depends on the power, current, resistance and size of the filament. Lumens is the unit of measurement for the brightness of a bulb. A bulb has more brightness if there is more power and current. Greater the resistance, less is the brightness.
If the current is stronger then the bulb will be brighter.The reading is much easier when you sit under the brighter bulb.
You alter the brightness of a bulb by changing the voltage or frequency that is applied to the bulb.
lower wattage bulb
A pencil has nothing to do with the brightness of a light bulb.
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
Halogens are about 30% more efficient so 300 watts incandescent is equivalent to about 210 watts halogen. It's also equivalent in brightness to about 60 watts CFL.
The bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
The wattage will depend upon the type of bulb and the number of lights on the string. It will tell you on the package what each bulb requires in wattage, so you only need to multiply that by the number of bulbs in the string. so, number of bulbs x wattage requirement for each bulb = wattage requirement.