A 50/50 mixture of antifreeze and distilled water.
To replace the heater core on a 1972 Buick Skylark, first disconnect the battery and drain the cooling system. Remove the dashboard and the heater assembly from the vehicle to access the heater core. Unclamp and disconnect the old heater core from the heater box, then install the new core and reassemble everything in reverse order. Finally, refill the cooling system and check for leaks.
In my Buick? Not a thing. Need more info on what your Buick is doing or not doing --- cooling system problem? In dash heater problem? Engine overheating?
Hi there, here is the information: Engine Cooling System with A/C 9.1 liters 9.6 quarts
its the cooling fan for the engine
Checkhttp://autorepair.about.com/library/faqs/bl113g.htm
1993 and before it is R-12, 1994 and later its R-134a
1993 and before it is R-12, 1994 and later its R-134a
where is the cooling fan relay in a 1996 buick lasebre
Whats the procedure for replacing a 2002 Buick Lesabre front strut.?
Unscrew cap near center of firewall. Screw on ac refill can & follow directions on can. Suggest you use refill with a leak sealer additive.
Is the question how to bleed a Buick 3800 cooling system? I would say open that little petcock by the themostat housing and release all the air as you fill the system with coolant. When coolant comes out instead of air all the air is out.
The 2001 Buick Century came equipped with the 3100 V6 (engine code 'J'). The cooling system capacity is 11.6 quarts.