6 degrees before top dead center
8 to 10 degreds btdc
10 degrees, non-adjustable
Ignition timing or valve timing?
point gap 1978m ford
where are the timing marks on a ford ka 1.3 and how do i check the timing is correct
The ignition timing is controlled by the ECU, and is not adjustable.
The ignition timing is controlled by the ECU, and is not adjustable.
Yes ANSWER No - a 1998 3.0 L Ford Ranger does not have a distributor which would allow you to adjust the ignition timing - it has a coil pack and the ignition timing is controlled by the PCM ( powertrain control module )
Ignition timing is automatically set. sorry.
where are timing marks on 89 ford probe 4 cylinder I have the bottom not the top
To set the ignition timing on a Ford Probe GT 95 with an MX engine, remove the two 12 mm head bolts holding the distributor in place. Then rotate the distributor to set the ignition timing.
At least in the model year of 1971 the correct timing is set with the vacuum hose to the distrubutor disconected and the headlights on (not hi-beam) to 6 degrees... adjust dwell (point gap) before timing.