0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
If your original central air conditioner was undersized at 3 ton but cools ok and you install a 3 ton two stage heat pump will the first stage be big enough to add in your basement or 2600 sf total?
The total tonnage is still 3. I would say no to 2600sf.
How much does 1 ton of bio diesel cost?
1 ton of green energy
What is the meaning of standard ton of refrigeration?
A Ton is the measurement of the amount of heat required to melt one ton of ice. It is also 12,000 BTU (British Thermal Unit) So the Ton is a measurement of the amount of heat that the refrigeration system can remove.
Will a 2 ton air handler work with a 3 ton heat pump?
depending on ambient temperature and humidity it is likely to freeze on cooling since there won't be enough heat exchange area or air flow to dissipate the 36,000 BTU of the 3 ton unit without dropping below freezing point of the water that will be condensed on the surfaces. On heating the temperature of the heat exchange coils will get too high the pressure will be too high and the outside unit will draw excessive power possibly trip a safety device. In short: it might but I sure would not risk it.
How do you convert refrigeration tons to BTU?
This conversion is very simple : and is 1 ton = 12,000 BTU/hour.So if you have a 3 ton of refrigeration you have 36,000 BTU/hour.In addition, I want to add that in some large Data Centers, there is a movement from BTU to kW of power used by equipment. This is probably driving the Tons/kW question that the HVAC engineers are telling people cannot be solved.1 Ton of cooling will eliminate 12,000 BTU/hr of heat.12,000 BTU/hr will be produced by 3.516 kW of power used by equipment.1 Ton of cooling will then handle 3.516 kW of equipment load based heat exhaust.
What size heat pump for 2800 sq ft?
In a Cold Climate and Hot Climate: Each ton of heat pump capacity can heat/cool approximately 500-600 square feet.In a Moderate Climate: Each ton of heat pump capacity can heat/cool 600-700 square feet.So either a 5.0 ton heat pump in a cold climateor a 4.5 ton heat pump in a moderate climate.
What is the size of a goodman heat pump cplj48-1?
it is a 12 seer 4 ton heat pump
Need info on 13 seer split heat pump?
I have a4 ton air handler and a three and a half ton condenser 13 seer goodman heat pump will my seer change
What size is the goodman heat pump model cplj30-1b?
2 1/2 ton heat pump, I believe 12 seer.
What is the tonage for the Goodman heat pump model number CPKE30-1B?
It's actually a 2 1/2 ton heat pump
How much freon does a 5 ton unit hold?
How much freon does a 5 ton heat pump hold?
What is the goodman heat pump model ck49-18 what is the tonage?
4 ton
What is the tempstar heat pump model number N4H330AKE100 tonnage?
2.5 ton
Is the ICP model NHP048ALCZ Serial No ED517427335BAMS a heat pump or air conditioner and what is the tonnage?
It is a 4 ton heat pump made by Inner City Products
What size heat pump system is needed for an 1400 square foot split level home?
2.0 ton or 2.5 ton
Trying to find the tonnage on a Intercity Products YE036G heat pump?
3 ton.
What tonage is the goodman aruf36421ba?
It is a Goodman 3.5 ton 13 seer Heat pump.
