answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

How much does 1 ton of bio diesel cost?

1 ton of green energy


If your original central air conditioner was undersized at 3 ton but cools ok and you install a 3 ton two stage heat pump will the first stage be big enough to add in your basement or 2600 sf total?

The total tonnage is still 3. I would say no to 2600sf.


What is the meaning of standard ton of refrigeration?

A Ton is the measurement of the amount of heat required to melt one ton of ice. It is also 12,000 BTU (British Thermal Unit) So the Ton is a measurement of the amount of heat that the refrigeration system can remove.


Will a 2 ton air handler work with a 3 ton heat pump?

depending on ambient temperature and humidity it is likely to freeze on cooling since there won't be enough heat exchange area or air flow to dissipate the 36,000 BTU of the 3 ton unit without dropping below freezing point of the water that will be condensed on the surfaces. On heating the temperature of the heat exchange coils will get too high the pressure will be too high and the outside unit will draw excessive power possibly trip a safety device. In short: it might but I sure would not risk it.


How do you convert refrigeration tons to BTU?

This conversion is very simple : and is 1 ton = 12,000 BTU/hour.So if you have a 3 ton of refrigeration you have 36,000 BTU/hour.In addition, I want to add that in some large Data Centers, there is a movement from BTU to kW of power used by equipment. This is probably driving the Tons/kW question that the HVAC engineers are telling people cannot be solved.1 Ton of cooling will eliminate 12,000 BTU/hr of heat.12,000 BTU/hr will be produced by 3.516 kW of power used by equipment.1 Ton of cooling will then handle 3.516 kW of equipment load based heat exhaust.

Related Questions

What are the benefits of installing a 4 ton Trane heat pump in your home?

Installing a 4 ton Trane heat pump in your home can provide benefits such as energy efficiency, cost savings on heating and cooling, improved indoor comfort, and environmental friendliness.


What are the benefits of installing a 4 ton heat pump split system in a residential property?

Installing a 4 ton heat pump split system in a residential property can provide benefits such as efficient heating and cooling, lower energy bills, improved indoor air quality, and increased home value.


What are the benefits of installing a 2 ton heat pump split system in a residential property?

Installing a 2 ton heat pump split system in a residential property can provide benefits such as efficient heating and cooling, lower energy bills, improved indoor air quality, and increased home value.


What size heat pump for 2800 sq ft?

In a Cold Climate and Hot Climate: Each ton of heat pump capacity can heat/cool approximately 500-600 square feet.In a Moderate Climate: Each ton of heat pump capacity can heat/cool 600-700 square feet.So either a 5.0 ton heat pump in a cold climateor a 4.5 ton heat pump in a moderate climate.


What is the size of a goodman heat pump cplj48-1?

it is a 12 seer 4 ton heat pump


How many BTUs are in a one ton heat pump?

A one ton heat pump typically has around 12,000 British Thermal Units (BTUs) per hour of heating or cooling capacity.


Need info on 13 seer split heat pump?

I have a4 ton air handler and a three and a half ton condenser 13 seer goodman heat pump will my seer change


What size is the goodman heat pump model cplj30-1b?

2 1/2 ton heat pump, I believe 12 seer.


What is the tonage for the Goodman heat pump model number CPKE30-1B?

It's actually a 2 1/2 ton heat pump


How much freon does a 5 ton unit hold?

How much freon does a 5 ton heat pump hold?


What is the tempstar heat pump model number N4H330AKE100 tonnage?

2.5 ton


What is the goodman heat pump model ck49-18 what is the tonage?

4 ton