0
What else can I help you with?
Specify the crystal frequency required for an 8085 system to operate at 1.1mhz?
The crystal frquency in an 8085 system is twice the desired clock frequency, so a crystal of 2.2 MHz is required to operate at 1.1 MHz.Note: Clock frequency is not the same as instructions per second, because the instructions in an 8085 take a variable number of clock cycles, between 4 and 18, to execute.
What frequency is required for optimal performance in this system?
The optimal frequency required for peak performance in this system is 2.4 GHz.
What is the mesurement of frequency of a system bus?
The frequency of a system bus is measured in Hz. Modern computer system buses operate at hundreds of MHz or at GHz.
How many generator we can operate in parallel in a system?
In a grid system all the alternators run in parallel, locked together in frequency.
What is the need of under frequency relay in load shedding on power system?
when the load on a certain system increases the frequency of the system falls normally. It is dangerous to operate the equipments when the frequency is lower than the normal rated frequency so shed the when the frequency falls under voltage relays are used. I hope i answered your question :)
Difference between system tick and processor clock?
Based on the Crystal used in the circuit, and the divisor selection, the processor clock frequency is obtained the tick time is the min clock cycles required to do a nop operation
How GHz range system clock frequency is generated If so Is it possible with transistor circuits or lumped circuit?
It's generated using a quartz crystal and frequency multipliers on a motherboard.
Do businesses have to use a certain type of two-way radio?
When you purchase your radio system you will also purchase an FCC licence to operate which will give you your own frequency. You can also arrange to have your frequency added to a local repeater so your system will have greater range.
Which crystal system does corundum have?
Corundum is in the trigonal crystal system.
Will a 110V 60Hz home theater system bought in the US work in Singapore which uses a 220V 50Hz by just using a voltage transformer?
Your stereo system has an internal transformer in the power supply that is designed to operate at a given frequency. If it is designed to operate at the load your stereo system will use at 50 Hz, then yes. Otherwise this transformer will overheat when connected at the wrong frequency, and will burn out. You might be lucky and the power supply may be labelled to operate at 50 or 60Hz; if not, I recommend contacting the manufacturer. A voltage transformer will convert 50Hz 220 to 50Hz 110. To change frequency, you need special equipment.
Beryl belongs to what crystal system?
hexagonal crystal system ( 6 sided )
What is a measurement of frequency of a system bus and CPU. which is faster the system bus or CPU?
CPU operates from 166 MHz to more than 3 GHz system can operate from 133 MHz to 400 MHz. CPU is faster than the system bus
