Want this question answered?
In the first part of the question there will be only one wire in the conduit, in the second part of the question there will be two wires in the conduit.
Yes. Actually they should be run in the same conduit. You don't ever want to run parallel separately.
derating
Yes they can. There are regulations that cover most jurisdictions regarding how different cables can be contained. It is important that you are knowledgeable about your local requirements before starting the work.
RSC pipe - Rigid Steel Conduit (RSC) can be installed indoors or outdoors, in dry or wet locations, exposed or concealed, in all kinds of atmospheric conditions, and in hazardous locations.
The conductors of any three phase circuit must be run in the same conduit. If the circuit requires a neutral, it must also run with the conductors in the same conduit. (If they were to be run in more than one conduit or raceway, the circuit would not operate properly.)
The simple answer to your question is yes. But there are limits to how many wires can be in any conduit, and the current carrying capacity of the conductors can be affected by distance, ambient temperature, and how many conductors are contained in the same conduit. Other things to consider are, Can you physically fit the wires in there? Would it be easier to run a new conduit? Do you have the manpower necessary to get the work done?
No, the bare copper grounding conductor can not be in a conduit with other conductors. It can be in conduit by itself to provide mechanical protection for the wire.
The amount of conductors per conduit size example code says 3 number 4 conductors in a 1'' conduit
Conduit sizing is based on the number of conductors that are drawn into it. Without the number of 1000 MCM conductors, an answer an not be given.
Conduit wiring is synonymous to wires in a pipe.
Yes. The thing that has to be closely watched is the load on the conductors. The conductors will have to be de-rated as the code only gives amperage rating for three conductors in a raceway. So watch the connected amperage to each load and fill the conduit accordingly. This supersedes the conduit fill requirements rule.
A conduit is a set of closed canalization circular or not that assures the free passage of conductors and ensures their continuous protection.
The required size of a conduit raceway for a 3-5000 mcm wire is 300 kcmil. It maximizes the limits on the wire fill for raceways.
Yes, any flexible conduit that has live wires drawn into it must have a ground wire also installed with the "hot" conductors. The reasoning behind this rule is that the flex in the conduit is coiled and has a long length to it. The continuation of the grounding medium through the tightness of the conduit connectors to the flex was not considered a properly secured grounding system so to overcome this weakness in the grounding system, a ground wire now has to be installed.
9
An electrical conduit is commonly installed in several steps. The first step would be to carefully plan the position of the conduit and what materials that are required for the surface. Then one should execute the plan with common tools such as a screwdriver.