0
Star voltage is 1 / 1.732, or 0.577 delta voltage. (1.732 is the square root of 3.) It follows, then, that star current is 0.577 delta current.
Not asked, but answered for completeness, star power is 0.5772, or 0.3333 delta power. This is why large motors use a star-delta start sequence - to minimize startup thermal stress.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Should a star-delta motor be supplied wye or delta power?
A star-delta motor should be supplied star-delta.Wye is simply another name for star. Star-delta motors use a star or wye configuration to start, and a delta configuration to run. This reduces the voltage on the windings during the high current starting time.
What is the formula use for calculation voltage and current in star and delta?
Balanced Star (Wye) Connected Systems:Line Voltage = 1.732 x Phase VoltageLine Current = Phase CurrentBalanced Delta Connected Systems:Line Voltage = Phase VoltageLine Current = 1.732 x Phase Current
What are the advantages of using star connection?
The inrush current is reduced. This is the reason for star delta starters. Motor starts on star and after about 10 to 15 seconds, depending on the load of the motor, it switches to a delta configuration to run.
What is the star delta working principle?
when starting a 3 phase induction motor,first start with star connection,because reduced current is being applied and after start change it to delta connection then. full line current is applied to the motor.
What is the connection of normal wire star or delta?
normally delta connection wired in 3 phase induction motor. during starting wiring is in Star and after running normal speed changeover to delta .beacause starting time its phase voltage equals less root3 times of line voltage ,line current and phase current equals. in Delta phase voltage and line voltage equals, and phase current equals root3 times line current
How much torque drawn by star motor compared with delta?
1/3
What are the star delta?
Compared with what?
Why do we use star to star connection in motor?
In a high voltage installation, with the same power, current drawn is small compared to those in low voltage. However it requires a thicker insulation, thus cost of insulation is significant compared to the conductor cost. By using a star connected winding, the insulation voltage required is equal to line to neutral connection, otherwise if it is connected in delta the insulation rating has to be provided for a line to line connection. Despite having a higher current, the total cost is still lower compared to using a higher insulation rating.
Why using on motor star delta starter?
because at the starting the induction motor drawn a heavy current thats why we use starter to increase the starting resistance of the induction motor!
What is Full load current for 40 HP star delta motor?
What is the continuous current of 10HP star delta motor
What is line voltage and line current in star connection define?
In star the voltage from line to neutral is 1/sqrt(3) times the nominal voltage, while the load current equals the line current. In delta the voltage between lines is the nominal voltage, while the load current is 1/sqrt(3) times the line current (for a balanced load). So a delta load needs 3 times the resistance compared to a star load of the same power.
Should a star-delta motor be supplied wye or delta power?
A star-delta motor should be supplied star-delta.Wye is simply another name for star. Star-delta motors use a star or wye configuration to start, and a delta configuration to run. This reduces the voltage on the windings during the high current starting time.
Can you draw star delta diagram in PLC logic?
PLC logic is a digital computer used to automate electromechanical processes. The Star delta diagram is a diagram for a simple circuit that has the capabilities of starting a high horse power motor. A star delta diagram can be drawn in PLC Logic.
Which is better for starting star or delta?
The star configuration has less current draw across the line when starting.
IWant to see the connection of the daigram Star and Delta connections?
Google star delta motor connections. If a motor is wired in star-delta (Yd), it starts up with lots of torque and then switches over to delta for normal "running". This is because the start-up current per phase when delta connected is much larger than star.
What is the formula use for calculation voltage and current in star and delta?
Balanced Star (Wye) Connected Systems:Line Voltage = 1.732 x Phase VoltageLine Current = Phase CurrentBalanced Delta Connected Systems:Line Voltage = Phase VoltageLine Current = 1.732 x Phase Current
What is the current in star connection?
If a motor is connected in star, the current in the motor winding will be equivalent to the line current. If the motor is connected in delta, the current will be 1/sqrt(3) of the line current. If three phase CTs are connected in Delta, their secondary current will be sqrt(3) higher than the CT ratio implies by the line current.
