Power = Current * Voltage Current = Power / Voltage Current = 60 W / 120 V Curretn = 0.5 A
Power = Volts x Amps ( P= V*A) Therefore Amps = P/V in this case .5 amps
Current in a series circuit is the same throughout the circuit. Voltages are additive. Voltage in a parallel circuit is the same throughout the circuit. Currents are additive.
yes
Flashlight by light, battery, circuit, a hood and a reflective cup, circuit storehouse, switch, etc, the basic principle is the current from the battery, and then to the circuit, after adjusting circuit voltage and current, and then output to the light source for lighting.
The circuit current is interrupted and all the lights will go out.
the same current flows through both light bulbs
the heated rear screen circuit has a higher resistance compared to the side light circuit
Incomplete circuit
No. Circuit is open but still HOT.
Electricity can flow in an electric circuit by a battery. The battery creates electrons, which flow through the wire, and then go into a light bulb. (That is how a light bulb in a circuit lights up.) A series circuit is a circuit with one wire that electrons can flow through. Also, there can be more than one light bulb connecting to the same wire. A parallel circuit is a circuit with light bulbs that have their own wire.ClarificationThe above answer, unfortunately, perpetuates the myth that current leaves a battery, and finds its way around a circuit. This is not the case at all. It is the load that 'draws' the current from the battery and it is the load that determines the size of that current.
In a series circuit each light completes its part of the circuit and connects to the next light. So, if one light fails, the circuit is broken and the flow of current to all lights must stop.
The purpose of a switch is to stop and start a current flow in a circuit. The stopping of a current flow in a circuit effects the load of the circuit by stopping its action. Resuming the current flow in a circuit also resumes the action of the load.