it varies slightly with each piece of wood (moisture content, etc.) but it's usually around .17 grams per cubic meter
the pice of wood has a mass of 18 grams calculate it volume and density
density is the product of mass and volume so its density will b 100 g/cm3..
No, that is why it floats. It is less dense than water
120/200=0.6 grams per cc
We've found that the large foam gliders (4ft wingspan) fly the furtherst, but for airplanes that are all the same size, I think that balsa wood is the way to go.
The density of dry balsa wood ranges from 0.04 to 0..4 grams per cm3 and so the mass would be between 1.0 and 8.4 grams.
Balsa wood is a slightly spongy, light color, extremely lightweight wood often used in hobbies for model airplane making.
Different varieties of balsa and different parts of the same tree have different densities. Values between 0,12 and 0,36 can be found from various sources. (Weight) Mass = Density * Volume Just like silver or chopped liver, you can get a bundle of balsa wood that weighs as much or as little as you want.
Surprising though it may seem, balsa is a hardwood. The actual hardness or density of the wood has little to do with the classification. - Generally if a tree is an angiosperm (bearing broad leaves and flowers) , then it's a hardwood.
The density of poplar, balsam wood is 0.331 grams/cm3. The density of poplar, yellow wood is 0.427 grams/cm3.
the density of balsa wood ranges from 40 to 340 kg/m^3....moreover the typical density is stated as 160kg/m^3...however most people use the debsity as 200kg/m^3 I suppose for calculations purpose
Balsa wood is natural it comes from the Balsa tree
it is around 1 GPa or lower.. depending on the type/density
No, balsa wood has no magnetic properties.
The short and unhelpful answer is, it depends how much of it you have!In fact, it is even more variable than that. As you may know, balsa is a very light and coarse grained wood, but the density of the grain can vary greatly and this in turn affects its weight by volume (the density).Typically the density of balsa ranges from 40 to 380 kg/m3 or 2.5 to 24 lb/f3
Yes! It varies on the density of the wood.Low density--4.7MPaMedium density--12.1 MPaHigh density--19.5MPaPlease see related link below!
The colorful balloons slowly floated away into the clear blue sky.