The diagram shows proper routing of the serpentine belt. Open your hood and look on the support in front of your radiator or look on the bottom of hood for the diagram.
show me a diagram of how to change my serpetine belt on my 96 olds LSType your answer here...
need a diagram on how a serpetine belt goes on
there should be a diagram right under the hood on how to route the belt
Should be on the hood or radiator cowling. Y-THINK-Y
around the pulleys! There should be a routing diagram under the hood on a sticker on the air filter housing
There is a tensioner pulley on the belt and this should take care of this. Check the diagram of the belt routing just in front of your radiator. Tensioner pulley may be stuck also
its a harry pickle like brooklen
if ur talking about a serpetine belt u remove the old one by releasing the tension on the belt by put a 1/2 drive ratchet into the tensioner pully and release the tension on the belt and remove it then follow the diagram on how to run the belt and then pull the tensioner and place belt with that pully into the pully drive run and then release and ur new belt is on
The long rubber belt, full circle that goes around the pully's in engine compartment?
You should be able to. Go to your local parts store and give them your make and model. Tell them you want a serpentine belt for your engine model without A/C. There should be a belt routing diagram under your hood that will show you how to install.
it should be on the front of the radiator by the handle which you pull the radiator out with that is where mine is if you cannot find it let me know and I will take a picture of mine and send it to you. (dawgstarr1967@yahoo.com)
There's usually a belt diagram under the hood. If not, try asking your local auto parts store or car dealer. I suppose you could always buy a motor manual with on in it.