The long rubber belt, full circle that goes around the pully's in engine compartment?
show me a diagram of how to change my serpetine belt on my 96 olds LSType your answer here...
its a harry pickle like brooklen
need a diagram on how a serpetine belt goes on
there should be a diagram right under the hood on how to route the belt
i need a picture showing how the serpetine belt goes on.
Should be on the hood or radiator cowling. Y-THINK-Y
The diagram shows proper routing of the serpentine belt. Open your hood and look on the support in front of your radiator or look on the bottom of hood for the diagram.
look for the roller on an arm when turning the bolt to loosen it tilts and releases pressure off the belt for removal
Yep can happen as the pump isnt working then. Put on a new belt. Check level of coolant in radiator etc
There is a tensioner pulley on the belt and this should take care of this. Check the diagram of the belt routing just in front of your radiator. Tensioner pulley may be stuck also
around the pulleys! There should be a routing diagram under the hood on a sticker on the air filter housing
Under the hood should be a manufacturer sticker which shows the belt lay out. If in doubt, take pictures of the belt while still on the car, then replace as shown in your own diagrams!